American Strat S-H 2 volume pots 3 way switch schema

[Kruspe]

Hi,

i play metal and i love my American Strat, i decided to transform it in a way that i can use it in my band.

My plan is to change pickguard and pickups i have decided for these :

• Bare Knuckle Warpig bridge alnico magnet
• Kinman noiseless neck Single coil avn-69

My pickguard looks like this :



I would like to have 2 volume pots and push pull pot on the volume 2 (bridge pickup volume) to split the warpig on single coil when pulling up.

There will be a 3-way switch, position down is just bridge, middle is neck + bridge both single coil (warpig splitted to single coil) in series not in parallel, up position is just the neck pickup.

What i would like to have if possible, is that when you pull the second pot up to split the warpig, it will bypass anything you did before in the switch and only this will be active, but thats optional, that will be probably hard to do..

I have found an schema on SD site, but its not really the same as i need.


Would you guys have something available for this setup already, experience ? Maybe somebody did similar thing etc.

Thanks for replies !

 

[Kruspe]

Re: American Strat S-H 2 volume pots 3 way switch schema

nothing ?

 

[Kruspe]

Re: American Strat S-H 2 volume pots 3 way switch schema

Got it connected

 

[jeremy]

Re: American Strat S-H 2 volume pots 3 way switch schema

so you got this wired as you wanted? got a diagram you could share?

 

[Kruspe]

Re: American Strat S-H 2 volume pots 3 way switch schema

I did, the diagram is pretty much the same as i shared here i just flipped the single to be a neck pickup and used the bare knuckle website for how to connect the push pull pot.