Pierre
Stratologist
I got a Madamp G2 and it should be finished tomorrow or in 2 days, and I'm wondering how I could finish the project. I was thinking about simply putting it in head format, with black cloth at the front, nothing at the back, and of course this black plastic thing around the wood that I have no idea how it's called...
So anyway... Any tips would be appreciated. For the wood I was simply thinking about Pine ply, as most cabinets seem to be made of it.
Do I just need to get the proper dimensions 4 pieces, put the blackplasticthingwhosenameIforgot around it, assemble it all, put in the corner et voila..?
Mostly I'm concerned with how to get the black cloth that'll go in front a la Marshall and the black thing to put around the wood. Thanks people!
Ah and bulding even a 2W single channel baby is ****ing hard at times, and one of my fingers is a painful reminder of it now
I ALWAYS forget to tin my wires before soldering the connection and as such I can't put the shrink tube properly over the whole of the thing...
So anyway... Any tips would be appreciated. For the wood I was simply thinking about Pine ply, as most cabinets seem to be made of it.
Do I just need to get the proper dimensions 4 pieces, put the blackplasticthingwhosenameIforgot around it, assemble it all, put in the corner et voila..?
Mostly I'm concerned with how to get the black cloth that'll go in front a la Marshall and the black thing to put around the wood. Thanks people!
Ah and bulding even a 2W single channel baby is ****ing hard at times, and one of my fingers is a painful reminder of it now
I ALWAYS forget to tin my wires before soldering the connection and as such I can't put the shrink tube properly over the whole of the thing...
I have pretty much no ways of taking pics at all for now.
I just meant, where could I get some here in the UK, it's still my main problem now...
