Re: Annoying Feedback Noise
Ok. I took my time and spent 4 hours last night rewiring the whole thing. It's less congestive and look pretty good. I hooked it up a few minutes ago and it still has that transistor radio, whistling type of sound. It's not very loud but it's there. The more I turn up the amp, the louder it is. I forgot to turn my standby off on the amp and unplugged the cord. The fascinating thing is that the same exact noise is there when the cord isn't in the jack. Could it be the amp causing this noise? I don't understand why my other guitar doesn't do this. It has active pickups and someone posted on here earlier that these pickups are configured differently as far as grounding.
These cords are new Monster cables. The amp, a Marshall DSL-40C tube amp, is about 16 months old. What the heck is going on? I'm ready to have a tech look at the guitar. It's a shame, because I changed everything on this guitar and I want to complete the project myself. I don't want to take it to a tech and spend money to have someone fix it, to find out that it's the amp.
I just used several other cords and the same thing. I also done a little experiment on the guitar. If I turn the tone all the way down while the volume is turned all the way up, the noise disappeared. I played around with the volume while the tone was all the way down and the noise would reappear at various turns. The noise stays constant while the tone is turned up no matter how I turned the volume.
Is there a particular way that the spacers, washers, and nuts on the pots and switch have to be for grounding? I place the rough looking spacer on the inside followed by a spacer and nut on the outside.