Another HSS special wiring question

donaldr

donaldr

New member
Hi.

I'm fairly newbe on guitar wiring and I searched the forum/internet but didn't found what I'm looking for.

I currently have an HSS superstrat with a set of EMG pickups, pots are Master Volume, Neck Tone, Middle Tone. I already ordered a stk-s7 and a screaming demon to convert to HS but still waiting and I might use them for something else.

In the meantime I'd like to try something:

First thing I would like to try is Push-Pull Middle Tone where in the push position the bridge pickup bypasses the master volume when the switch is in bridge-only position (1).

Second thing I would like to try is Master Volume and Master Tone but with a toggle (in the place of the middle tone pot) to switch the bridge pickup straight to output (bypassing volume and tone pots).

Can someone be nice enough to provide me those 2 wiring diagrams please?

Thanks a lot :)
 
Re: Another HSS special wiring question

I'm not sure what you want for your no.1.For the bridge bypass, I'm assuming you're also gonna bypass the switch.In that case, the ground and hot wire and solder it to the middle toggle pins(try to get a DPDT for this) then the top one 2 pins and solder them to the jack.Then solder some wire on to the last 2 pins and assume those are the bridge wires.I'll post a pic once I finish doing it on MS paint
 
Re: Another HSS special wiring question

Will the output jack have wires from the DPDT switch and the 5-way switch?
 
You must log in or register to reply here.
Back
Top