any one know of Soper Swithh diagram for 2 HBs? (Tele-Gib!)

[merseymale]

HI!

wanna try a new variation on a twin HumBucker Tele with single volume & tone but cant find a wiring diagram.

I imagine I'll need a super switch:

http://www.premierguitar.com/articles/Exploring_Fenders_5_Way_Super_Switch

I'm hoping for

Position ONE/back: Bridge HumBucker*
Position TWO: Bridge Single Coil(ie spilit HB)
Position THREE: Both HumBucker**
Position 4:Bridge Single Coil(ie spilitHB)& Neck HumBucker*
Position FIVE: Neck Single Coil(ie spilitHB)

*1 pup in Series just like, say, a Les Paul, etc...
**2 pups in parallel just like, say, a Les Paul or Tele etc...

Thanks in advance!

 

[DrNewcenstein]

Re: any one know of Soper Swithh diagram for 2 HBs? (Tele-Gib!)

It's my understanding that a humbucker's default wiring is series to begin with, so pos 1 and 5 will be each pickup in series. I may be further mistaken in that both series-wired humbuckers together puts them in parallel with each other by default.

This could be done without a SuperSwitch, just using a regular 5-way blade, if you wire the bridge and neck for autosplits on 2 and 4, unless you wanted just the one bridge coil with both neck coils. In that case, simply wire the bridge pickup for autosplitting on 2 and 4.

 

[Guitaraxz]

Re: any one know of Soper Swithh diagram for 2 HBs? (Tele-Gib!)

Drew it up for ya, I'm sure the diagram exists but it would take me longer to find it.
You only need three of the four poles in a Superswitch.