I decided to go w/ a new pickguard and pickup on my 1-pickup strat. New setup will be a reverse angled single-coil sized bridge pickup. 500K volume and no tone pot. Ended up ordering a Dimarzio Billy Corgan BC-2 bridge pickup.
I don't expect it to 100% sound like a full size bucker, nor do I quite want it to, but if it gets me pretty close that's cool. With the narrower sensing field of the blades, it should prove interesting, especially if the reverse angling of the pickup makes any difference. Should get me slightly closer to a full sized bucker sound... which makes this particular modding probably even more unnecessary from how it's currently set up
Also ordered a 2-way mini-switch for a thinned out humbucker tone in parallel mode. I tested parallel mode w/ the Dimarzio PAF that's in the guitar now, and I'm really digging it for clean stuff and higher gain stuff. Sounds more like medium gain in parallel and seems to feel just a tad compressed on clean stuff. I'm expecting the higher output BC-2 to give me a juiced up version of what I'm getting now.
My goal is to have a nice fat, thick bridge pickup tone for high gain stuff, and then a more moderately toned humbucker sound in parallel for Ramones style riffing w/ distortion and beautiful clean tones. Basically, the most I can get with a single pickup and no tone knob. My current setup works great too-- I just thought I'd kick it up a notch and change the look a bit w/ a new guard & bridge pickup.
Anyone used one of the Billy Corgan Dimarzios, specifically the bridge model?
I don't expect it to 100% sound like a full size bucker, nor do I quite want it to, but if it gets me pretty close that's cool. With the narrower sensing field of the blades, it should prove interesting, especially if the reverse angling of the pickup makes any difference. Should get me slightly closer to a full sized bucker sound... which makes this particular modding probably even more unnecessary from how it's currently set up
Also ordered a 2-way mini-switch for a thinned out humbucker tone in parallel mode. I tested parallel mode w/ the Dimarzio PAF that's in the guitar now, and I'm really digging it for clean stuff and higher gain stuff. Sounds more like medium gain in parallel and seems to feel just a tad compressed on clean stuff. I'm expecting the higher output BC-2 to give me a juiced up version of what I'm getting now.
My goal is to have a nice fat, thick bridge pickup tone for high gain stuff, and then a more moderately toned humbucker sound in parallel for Ramones style riffing w/ distortion and beautiful clean tones. Basically, the most I can get with a single pickup and no tone knob. My current setup works great too-- I just thought I'd kick it up a notch and change the look a bit w/ a new guard & bridge pickup.
Anyone used one of the Billy Corgan Dimarzios, specifically the bridge model?