APB-1 Wiring with NO Tone Pot

[chuck muncie]

Hello kind members. Thank you for having me aboard.
I would like to wire an active APB1 P Bass pickup > Volume Pot > Output (no tone pot).
Would I wire it as in the diagram provided and just bypass/eliminate the Tone Pot? Should I ground the bridge to the Volume Pot or something else, or just leave it ungrounded? Thanks all for reading this.

 

[Clint 55]

Re: APB-1 Wiring with NO Tone Pot

Welcome to the forum!

Yes, omit the tone pot while leaving the rest the same. And ground the bridge to the volume pot back.

 

[chuck muncie]

Re: APB-1 Wiring with NO Tone Pot

Thanks! One more question for you, or someone, if I may.
The APB1's I ordered from Seymour Duncan came with 100k pots. Since I am trying to emulate Dug Pinnick's signal (more or less) the Schecter Dug Bass has a 25k (Vol) pot wired (no tone) to output. Do you think there will be a noticeable difference in tone or volume taper with 100k vs 25k wired with no tone? Thanks again!