ArtieToo help! ! !

[fatigueofheart]

hey man! can you or anybody on this board tell me how to wire my guitar SSS in which the tone control is disabled for the bridge pickup? The guitar has 3 singles, a tone and volume and a fiveway. Thanks in advance!

 

[jeremy]

Re: ArtieToo help! ! !

you run the tone control off only the middle and neck lugs of the switch instead of the volume pot

 

[fatigueofheart]

Re: ArtieToo help! ! !

hey...thanks jeremy! ! 1 but i'm not really sure which lug is for which on the switch...can you post a quick pic? thanks again! !

 

[fatigueofheart]

Re: ArtieToo help! ! !

bump...:-/

whuch lug willl it be?? the switch is like this btw.....

0 1 2 3 0 1 2 3
B M N V g

B=Bridge hot
M=Middle hot
N= neck hot
V= to volume pot
g= gorunded on volume pot chasis

 

[Artie]

Re: ArtieToo help! ! !

Use this diagram as a reference. That should make it clear.

If not, ask.

Strat tone connections

Artie

Edit: Ooops . . . you have a different type of 5-way. Let me think a sec . . . :smack:

 

[fatigueofheart]

Re: ArtieToo help! ! !

hey man! ! ! thank you so much! ! you too jeremy! ! i got it working so don't worry about it..... i soldered the second 2,3 lug to the tone pot and brridge the first 3 to the first 0 lug. Thanks again guys! ! !

 

[Artie]

Re: ArtieToo help! ! !

I think that will work. (If it does, it does.)

I was going to post this:

I think, thats the type of switch you have.

Artie

 

[fatigueofheart]

Re: ArtieToo help! ! !

yup...that is essentially what i did. Again, thanks for your time! ! !