Been modding again!

[ThreeChordWonder]

A while back I fitted a push-pull to enable coil splitting on the bridge humbucker on my MIM HSS Strat.

Yesterday I added the NOT the Gilmour mod, um Gilmour mod, that is adding another push-pull to enable bridge plus neck, and by extension and the 5-way switch, an all three pickups options.

As someone on another forum pointed out,, it's clearly NOT the Gilmour mod because (sarcasm follows):

1. Mine is an HSS Strat not an SSS Strat.
2. It was made in Mexico not the US.
3. Mine is blue not black like Dave G.'s.
4. I also have the completely separate mod to coil split the humbucker.
5. I used push-pulls instead of spearate switches.
6. I almost certainly didn't use the same brands of pickups, wires, solder, etc. as Dave G. did.

Anyway, here's the circuit diagram. Constructive criticism or pointing out error comments welcomed.

 

[Synapsys]

And you also didn't use the SSL-5...

 

[eclecticsynergy]

Add-neck is a great mod. Neck single + bridge single is a wonderful option to add to a Strat.
Never been a big fan of the all-three-on setting myself but some use it.
Neck single + bridge hum can be cool too; I've got that combination available on several guitars and I like it.

 

[dotsdad]

One suggestion...use the other pole of your neck/bridge swutch to take the bridge tone knob out of the circuit. The two tones can muddy the sound. Taking the bridge tone out will make the neck/bridge tone honk and spank like a telecaster!