Behringer UB1832FX-Pro

[NathanCahill]

I have just recently received 2 of these from the cable access channel that the local school runs. I'm not sure there is actually anything wrong with them or if the kids just didn't know how to run them properly. I'm going to try and get them all tested out this weekend. My question is, are they worth trying to repair as they are circut board design or will the cost be fairly prohibitive?

 

[dominus]

Re: Behringer UB1832FX-Pro

E-Bay says one was worth $162.50 in 100% working order, and another was worth $78 missing one knob and having another knob broken off (but still functioning.)

 

[NathanCahill]

Re: Behringer UB1832FX-Pro

I checked both of them out. Everything had pre fader signal just nothing post fader. Messed with the faders and they make intermitent contact internaly. Looks like 3 faders and they are both good to go. Took the one that had 2 bad channels apart this weekend. Besides everything being surface mounted on the board the faders don't look too difficult to replace. For the cash of 3, 60mm stereo faders I got 2 fairly usable boards. Cool!