Birsdeye Strat Neck - 22 Jumbo Frets, Abalone Inlays, Maple Fretboard!

[Masta' C]

Picked this up from another forum member recently, but I ran out of time to work on the project I had intended it for, so off it goes to a new home...

Really nice Licensed Fender "Birdseye Maple" Stratocaster replacement neck made by Mighty Mite!

Features solid maple construction with light Birdseye figuring throughout! Standard back profile, classic skunk stripe, gorgeous abalone inlays and a fast satin finish. All 22 Jumbo frets are in excellent shape and the neck shows only minor handling wear. It was previously fitted with standard Fender American type tuners (not included). NOTE: The genuine Fender American string trees shown in the picture ARE included!

Mighty Mite® MM2925 Birdseye Maple Strat® Guitar Neck Features:

•Scale: 25.5"
•Nut Width: 1-11/16"
•Neck Pocket: 2-3/16"
•Headstock: Standard Strat®
•Fretboard Material: Birdseye Maple
•String Nut: Standard
•Inlay: Abalone Dot
•Number of Frets: 22 Jumbo frets
•Neck Radius: 9.5"
•Neck Material: Birdseye Maple
•Finish: Light Clear Satin
•Wood Source: Northern Michigan / Canadian Hard Rock Maple


Only $99 w/ Free Shipping

 

[B2D]

Re: Birsdeye Strat Neck - 22 Jumbo Frets, Abalone Inlays, Maple Fretboard!

Whats the nut width on it?

 

[Masta' C]

Re: Birsdeye Strat Neck - 22 Jumbo Frets, Abalone Inlays, Maple Fretboard!

Whats the nut width on it?

Mighty Mite® MM2925 Birdseye Maple Strat® Guitar Neck Features:

•Scale: 25.5"
•Nut Width: 1-11/16"
•Neck Pocket: 2-3/16"
•Headstock: Standard Strat®
•Fretboard Material: Birdseye Maple
•String Nut: Standard
•Inlay: Abalone Dot
•Number of Frets: 22 Jumbo frets
•Neck Radius: 9.5"
•Neck Material: Birdseye Maple
•Finish: Light Clear Satin
•Wood Source: Northern Michigan / Canadian Hard Rock Maple
•Truss Rod: Included
•Status: Shaped, Inlayed, Fretted, and Finished
•Tuning Machines: 3/8" Holes Pre drilled. Measure 1" apart center-to-center

 

[B2D]

Re: Birsdeye Strat Neck - 22 Jumbo Frets, Abalone Inlays, Maple Fretboard!

Aw poop, I need 1-5/8ths. Thanks anyways.

 

[Masta' C]

Re: Birsdeye Strat Neck - 22 Jumbo Frets, Abalone Inlays, Maple Fretboard!

Bump!

 

[uOpt]

Re: Birsdeye Strat Neck - 22 Jumbo Frets, Abalone Inlays, Maple Fretboard!

Looks like your tuner specs are off? The neck looks like drilled for modern MIA Fender tuners.

 

[Masta' C]

Re: Birsdeye Strat Neck - 22 Jumbo Frets, Abalone Inlays, Maple Fretboard!

bump!