Silvercrow
New member
Hi Folks! My first post here / new to this forum! Playing guitar for over 40 years, which makes me old, I suppose! Pretty active on the Strat Talk forum and a lurker on a few others! So glad to be here and look forward to learning and hopefully, being able to contribute, too!
I have a Fender Am. Std. Strat, 2013, that I love- it's has a soft V neck, compound radius, an FSR model. Currently, I have a CS69 in the neck and middle, a Fender Diamondback humbucker in the bridge. Standard 5 way switch, but the humbucker is connected to the lower tone pot.
I want to get a humbucker for the neck, but probably not go the whole route of changing over to a full sized HH configuration.
I love the sound clips of the "Vintage Rails" and thought I'd go with that in the neck; and keep the Diamondback in the bridge. Could any of you offer suggestions for a middle pickup, to go along with the Vintage Rails and the Diamondback?
Also- not having much experience in doing my own swapping, I thought I'd have a go at doing this myself. I do have good soldering skills and the necessary equipment.
Will I need to, or should I, change the volume pot to a 500k Ohm when I go to the Vintage rails in the neck? Right now the Vol is 250K and is fine with both the CS69's and the bridge 'bucker.
Reason I'm changing? I'm preferring the sound and the noise reduction of humbucker equipped guitars (my other guitars are a Gibson LP and a Gibson SG, both of which have humbuckers) and just have come to like the tonality so much better.
I play classic rock, some jazz, and originals along those lines. I have a Positive Grid Bias Head Amp, Avatar speaker cab and also a Fender Mustang III v2 I use for amps (first time in over 30 years without a tube amp!)
Thanks for any suggestions, guidance, etc., I appreciate it!
Brian
I have a Fender Am. Std. Strat, 2013, that I love- it's has a soft V neck, compound radius, an FSR model. Currently, I have a CS69 in the neck and middle, a Fender Diamondback humbucker in the bridge. Standard 5 way switch, but the humbucker is connected to the lower tone pot.
I want to get a humbucker for the neck, but probably not go the whole route of changing over to a full sized HH configuration.
I love the sound clips of the "Vintage Rails" and thought I'd go with that in the neck; and keep the Diamondback in the bridge. Could any of you offer suggestions for a middle pickup, to go along with the Vintage Rails and the Diamondback?
Also- not having much experience in doing my own swapping, I thought I'd have a go at doing this myself. I do have good soldering skills and the necessary equipment.
Will I need to, or should I, change the volume pot to a 500k Ohm when I go to the Vintage rails in the neck? Right now the Vol is 250K and is fine with both the CS69's and the bridge 'bucker.
Reason I'm changing? I'm preferring the sound and the noise reduction of humbucker equipped guitars (my other guitars are a Gibson LP and a Gibson SG, both of which have humbuckers) and just have come to like the tonality so much better.
I play classic rock, some jazz, and originals along those lines. I have a Positive Grid Bias Head Amp, Avatar speaker cab and also a Fender Mustang III v2 I use for amps (first time in over 30 years without a tube amp!)
Thanks for any suggestions, guidance, etc., I appreciate it!
Brian