the guy who invented fire
Fuzzy. Guitars
Re: Buying a guitar tomorrow... maybe... help.
I have no idea what you are talking about at this point...
I have no idea what you are talking about at this point...
I have no idea what you are talking about at this point...
Not sure how Mark, his gear or his songs got into this at all...
I was simply stating that there are plenty of good sounding Tele's that have ash bodies and RW necks...
..
...have you at least HEARD of the taboo of Ash /Rosewood??:boggled:
Traditional thinking is 60's Alder with Rosewood boards are great Teles, yet nearly everyone reveres the blackgaurds with thier Ash/ Maple as being so much more epic.
If you go deep on Tele discussions on the net, you'll see that the Ash / Rosewood Tele is beyond just dubious mix; its downright abhorrent to many many in the know.
Its just something that shouldnt happen...
Traditional thinking is 60's Alder with Rosewood boards are great Teles, yet nearly everyone reveres the blackgaurds with thier Ash/ Maple as being so much more epic.
If you go deep on Tele discussions on the net, you'll see that the Ash / Rosewood Tele is beyond just dubious mix; its downright abhorrent to many many in the know.
Its just something that shouldnt happen.
Seriously, you post while drinking too much and don't think before you open your mouth
Fixed that for ya!
Me neither.I just don't like rosewood boards on a Tele.
So...getting back on topic, did you get anything Andrew????
This thread never left topic. As I said, Ash/ Rosewood is a notorious bad combination, and some builders refuse to even go there( I forget who at this time..is it USACG?..its a major Builder).
THERE IS NOTHING WRONG WITH ALDER/ROSEWOOD..although it isnt on par with Ash/Maple for respectibility.
Why dont you do some research..you are a great source of info , but you dont know everything, like you think you do.
I recently said how a Sound City L120m Amp has a huge problematic noise floor due to its interactive tone controls, and you came out point blank calling me an idiot. I owned the amp , an had an electrical engineer diagnose that issue IN WRITING, plus, if yuod get off your ass and look, there are threads on The Vintage Amp forum detailing the need to
reduce the noise floor on those amps, and one way is to by having the Amp effectively "Hiwatted".
Your a fool TGWIF.
By the way, I constructed a vwery expensive Warmoth Ash/Rosewood Srat with premium Warmoth parts as a 70's tribute.
It would NOT behave like an Alder Start..sounded awefull. I put a set of high output Strat Duncans ( SSL-3/2/6) and it came around.
Your know it all attitude sometimes puts you in over your head with stuff like this.
So...getting back on topic, did you get anything Andrew????
You're really something ya know that...
Loads of great sounding ash Tele's with RW boards....whats even more important that that to me regarding your post is I'd bet any amount of cold hard cash you can't hear the difference between an ash/maple Tele, an alder/RW Tele or even a basswood tele with whatever kind of neck on it...
I have a swamp ash Strat with a rosewood fret board. Sounds great to me.
That said just fine what fits you and go with that...