Uk Ant
New member
For those of you who are curious about the G12B that Marshall use in their 1912 1x12 cab those nice people at Celestion have sent me the spec… which was nice of them.
“This speaker uses a 2” diameter voice coil which gives it a very solid bottom end and quite a dark neutral top end with very little sparkle.”
Nominal Diameter - 12”
Power Rating - 150W
Nominal Impedance - 8ohm
Sensitivity - 98 db/W
Chassis Type - Pressed steel
Voice Coil Diameter - 2”
Voice Coil Material - Round copper
Magnet Type - Ceramic
Magnet Weight - 50oz
Frequency Range - 60-4000Hz
Resonance Frequency - 77Hz
DC Resistance - 7ohm
Unit Weight - 4.8kg (about 11lb)
Not sure if this helps anyone but me, but I thought I'd share
“This speaker uses a 2” diameter voice coil which gives it a very solid bottom end and quite a dark neutral top end with very little sparkle.”
Nominal Diameter - 12”
Power Rating - 150W
Nominal Impedance - 8ohm
Sensitivity - 98 db/W
Chassis Type - Pressed steel
Voice Coil Diameter - 2”
Voice Coil Material - Round copper
Magnet Type - Ceramic
Magnet Weight - 50oz
Frequency Range - 60-4000Hz
Resonance Frequency - 77Hz
DC Resistance - 7ohm
Unit Weight - 4.8kg (about 11lb)
Not sure if this helps anyone but me, but I thought I'd share
