Classic Stack Plus set - Calibrated bridge ?

[IMENATOR]

Is the bridge model in the Classic Stack Plus set really higher output to properly balance output with neck.middle? Text description says yes but resistance value Is the same for all 3. I was planning getting a set but If it Is not I may skip.

https://www.seymourduncan.com/single-product/classic-stack-plus-strat

 

[donaldr]

I have a Classic Stack Plus neck on m'y Strat copy, and a Vintage Hot Stack on the bridge: perfect match!

 

[Chistopher]

I second the above statement

 

[Mincer]

According to the website, the DCR of each pickup in the set is:

DCR: Neck: 8.5k, Middle: 8.5k, Bridge: 8.5k​

So, it appears that they are not calibrated that way. You can balance them with pickup height, though, or use something else for the bridge (like above).

 

[marcello252]

the commercial names of these stacked pickup are confusing to me, this is te vintage voiced one, right? but it said being hotter and fatter?

 

[Mincer]

The Classic Stack Plus is a stacked hum-cancelling pickup designed to give the best strat single coil sound without the hum.

 

[marcello252]

ok, I was reading the user comments on the sd page, there it is mentioned the fact they are fatter, that was confusing me

 

[jeremy]

i have an older set, but i assure you the bridge pup is different than the neck

 

[Mincer]

If anyone has a whole set (I just have a neck), they might weigh in. The website can certainly be wrong.

 

[jeremy]

i have a full set in one guitar. had a full set in another, swapped out the bridge for a vintage hot stack (thats my favorite set) and put the bridge model in the neck position with cs+ middle and hot stack + bridge. the bridge model in the neck is darker and higher output than the neck model