Coil Split only working on one pickup?

[JElliott49]

I'm in the process of wiring a HH strat with a 5 way switch. I've followed the 2 HUMBUCKER | 1 VOLUME 2 TONES | 5 WAY BLADE (with coil split) diagram (goo.gl/sH2GNb). Everything seems to be wired correctly, however only the neck pickup will coil split. When the switch is in position 3 or 4 there is no output from the bridge just the neck. Any ideas on why this is happening?

Here are some pics:

https://imgur.com/bP213jj
https://imgur.com/QF3Q1yN
https://imgur.com/gg2emSv
https://imgur.com/XBWEpn9

 

[Mincer]

Re: Coil Split only working on one pickup?

Hmm, your link to the diagram isn't working for me...also, what pickups are those?

 

[beaubrummels]

Coil Split only working on one pickup?

To me it looks like you put the neck red+white on the switch where the bridge red+white should be, and vice-versa

Looks like possibly Mark Holcomb / Custom Shop? Or it someone's sig pickups from the custom shop.

 

[JElliott49]

Re: Coil Split only working on one pickup?

The pickups are custom shop Mark Holcomb Alpha/Omegas. Here's the wiring diagram I was using https://docs.google.com/gview?embed...wp-content/uploads/2016/05/2H_5WSPL_1V_2T.pdf . From doing more research I think I need a 5 way super switch. So it'll be 1: Bridge HB, 2: Bridge SC, 3: Bridge & Neck, 4: Neck SC, 5: Neck HB. I can't seem to find a diagram which has 2 tones though they all seem to be 1 tone 1 volume.

 

[JElliott49]

Re: Coil Split only working on one pickup?

Just found this diagram which seems to be what I'm after https://guitarelectronics.com/2-humbuckers-5-way-lever-switch-1-volume-2-tones-02/