You mean tone pot? If so, yes the 22 nanofarad capacitor could help. The higher the cap value, the more treble is attenuated as you roll the knob.
Hope this helps.
Tony
You mean tone pot? If so, yes the 22 nanofarad capacitor could help. The higher the cap value, the more treble is attenuated as you roll the knob.
Hope this helps.
Tony
Tony, that's not quite right. The higher the value of the capacitor, the more upper midrange that is passed to ground when the tone control is reduced.
So a .02 mfd. cap would pass treble to ground but block the upper mids.
.047 mfd. would pass treble to ground but also pass some upper mids to ground.
That's a simplistic explanation but for most guitarists that's a workable way of looking at it.
If you're using the Dimebucker with 250K pots you're throwing away some treble that might be retained by switching to 500K pots. Generally, retaining more treble does tend to make a pickup sound a little more articulate and less muddy. But you might need to reduce the bass content too...try turning down your bass control on the amp. Lew