Covers for APH-1 set

[weldaar]

I am looking for a set of Nickel or Chrome covers for my APH-1 set. Not the Slash set, the older set. Any input would be great.

 

[Chistopher]

Re: Covers for APH-1 set

What bridge pickup spacing do you have?

 

[weldaar]

Re: Covers for APH-1 set

1-15/16

 

[weldaar]

Re: Covers for APH-1 set

They both seem to be the same. 1-15/16th or 50mm

 

[Chistopher]

Re: Covers for APH-1 set

Here they are:

https://www.seymourduncan.com/accessory/humbucker-cover-nickel?__uuid_ref=5bdf17bbf1f7d

 

[weldaar]

Re: Covers for APH-1 set

Yeah, thanx. Just ordered one. I already had one in stock

 

[Mincer]

Re: Covers for APH-1 set

I'd like this series of posts, but I can't.

 

[Gtrjunior]

Re: Covers for APH-1 set

I'd like this series of posts, but I can't.

I got you covered.

 

[Jeff_H]

Re: Covers for APH-1 set

Aren't standard sized SD pickups 49.2mm spaced, not 50mm? I'm not sure what trembucker spacing is.

 

[Discharged]

Re: Covers for APH-1 set

The Trembucker format is proprietary, so only Duncan covers will properly fit.

The SH format is not, ergo any cover with a 49.2mm spread will properly fit.

/Peter

 

[Jeff_H]

Re: Covers for APH-1 set

The Trembucker format is proprietary, so only Duncan covers will properly fit.

The SH format is not, ergo any cover with a 49.2mm spread will properly fit.

/Peter

Right. However, in post #4, the OP states that his pickup has 50mm spacing. Assuming that is not a measurement error I was wondering if the 49.2 Duncan cover would fit. Conversely, if 50mm is the correct measurement, is that trembucker spacing? I don't recall what trembucker spacing actually is.

 

[Discharged]

Re: Covers for APH-1 set

in post #4, the OP states that his pickup has 50mm spacing.

He asked specifically for APH1s. So, no 50mm spacing. As usual, user error.

if 50mm is the correct measurement, is that trembucker spacing?

It's NOT. Trembucker spacing is, as spec'ed in the p'up's specs sheet, 0.414" x 5 = 2.07" or 52.57mm.

/Peter

 

[Ayrton]

Re: Covers for APH-1 set

SH = 49.2mm
TB = 52.6mm

I wish Seymour Duncan would join the rest of the world in using same size bobbins with wider poles spacing. Everything about fitting Trembuckers is a PITA