here's a pic of my circuit board and one of the switch i plan on using
http://imageshack.com/a/img921/5959/AfXdsT.jpg
http://imageshack.com/a/img924/4972/lCC3Um.jpg
I removed the .01uf capacitor at C5 (sweep capacitor) I want to connect a 6 position switch with a different cap connected to each position. I have a 2 pole 6 position, i understand how it works and made sure to check continuity. I've tried for days to figure this out but i'm stumped. (I have not soldered the wires onto the board yet for this mod)
do i concern myself with pollarity?
how do I wire the switch with the board? (from the board to the switch which hole would connect to the common lug?)
do i solder a certain pole of each cap to each lug then bind the other ends together and ground them?
I'm new at this, I'm learning all i can and i understand i'm basically asking how to wire the whole thing. I would like to move on with this project, i think it would be easier for me to understand once i know how to wire it up.
thanks for any help, greatly appreciated.
http://imageshack.com/a/img921/5959/AfXdsT.jpg
http://imageshack.com/a/img924/4972/lCC3Um.jpg
I removed the .01uf capacitor at C5 (sweep capacitor) I want to connect a 6 position switch with a different cap connected to each position. I have a 2 pole 6 position, i understand how it works and made sure to check continuity. I've tried for days to figure this out but i'm stumped. (I have not soldered the wires onto the board yet for this mod)
do i concern myself with pollarity?
how do I wire the switch with the board? (from the board to the switch which hole would connect to the common lug?)
do i solder a certain pole of each cap to each lug then bind the other ends together and ground them?
I'm new at this, I'm learning all i can and i understand i'm basically asking how to wire the whole thing. I would like to move on with this project, i think it would be easier for me to understand once i know how to wire it up.
thanks for any help, greatly appreciated.
