Custom pedal board for Digitech RP360XP & Mesa Mk V foot switch

[Charvel1975]

I've just started looking at configuring a not very large pedal board that will sit behind a Behringer Eurolive F1320D 300W 12 inch Active Floor Monitor at live shows and will be hooked up to a Boogie Mark V 90-Watt Head and Harley Benton 4X12 w/factory Celestion Vintage 30's.

I'd like to have everything on the pedal board as well. Wondering if this would house everything?

Rockboard Pedal Case EPC 02 Black

https://www.thomannmusic.com/rockboard_pedal_case_epc_02_black.htm

For Live shows, been using a custom flight case pedal board that has a DigiTech RP360XP Guitar Multi-Effects Pedal with a DigiTech FS3X 3-button Foot Switch for External control, Korg Pitchblack Pedal Tuner, Line 6 Relay G30 Wireless and 3 separate power supplies for all 3 units that all plug into a D'Addario Tour-Grade Power Base Power Strip then to a Furman SS-6B 6-outlet Surge Suppressor Strip where power cord from EVH 5150 III 6L6 V2 head with a Morley Hum Exterminator Ground Loop Hum Exterminator is plugged into that. The EVH footswitch won't fit in the pedal board and it's outside.

I attached some pics I took after our show last night. pcorn:

 

[allbutromeo]

It's roughly 24"W×16"H so the best bet would be to mark out a rectangle that size and try to arrange everything you want into it. I feel like there has to be a way to cut some space with the power supplies/power strips. But, without seeing how everything is hooked up, I can't say for sure.

 

[El Dunco]

Let me know if it fits. It’s a great deal. I’ll take one of it will fit my RP1000 and a few stompboxes.