I've used amps for years around the house that just got put into stand-by unless being moved or unplugged during lightning storms. Never had problems with premature tube failure.
30 lashes for you!
That's good to hear, I always put my amp in standby for a little bit before turning it off and forget to switch it off a lot of times.
Heh i know you're just tryin to take it easy on your sweet Orange, but putting it on standby first doesn't really make the tubes cool down any differently. It's safe to just shut the whole thing off at once.
Actually, if you wanted to be totally anal, you'd shut the amp off with the On-Off switch while it was playable, not in standby.Really? I've always heard to leave in on standby for a little while like 30 sec, to supposedly lengthen the tube life.
Did you at least play it a little? It seems like after an amp has been hot for 3+ hours it really starts sounding great.
Here's a story from years ago when I was in a band. We used to practice Monday through Thursday. I went out to where we practiced on a Monday and I was the first person there. As soon as I opened up my car door I could hear the feedback just absolutely screaming. I ran over and threw up the warehouse door and ran inside. I thought my ears were gonna start bleeding. We had left our PA system on. There's no telling how long the thing had been feeding back. My guess would be since the last time we had been out there. And that was the previous thursday night...lol.
I read recently in one of EVH's 5150 III articles that this is his final test of an amp. He cranks it up, set's the guitar on the stand where it will generate killer feedback, then leaves it for a while (?weeks or a month, can't remember which.)