Dimarzio x2n (bridge) paired with titan (neck)

Re: Dimarzio x2n (bridge) paired with titan (neck)

I don’t see why they wouldn’t. That said, think hard about the Titan neck before buying. I now have one collecting dust in my spare room. It was lifeless imo. What sound are you going for at the neck? For soloing, I have heard the illuminator do well in a lot of vids.
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

I have an X2N paired with a D-Activator neck. It does crushing to crunchy to clear (not to be confused with clean) with a high gain sound, just by changing the three position switch.
Don't know about the Titan.

Sent from my Alcatel_5044C using Tapatalk
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

Thanks guys. I’ll prob take your advise and pair it with an illuminator! Ty!
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

I had a Jackson Warrior with X2N and Super 2 that paired well together. Mike Romeo from Symphony X pairs his X2N with a Tone Zone with great results.
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

I don’t see why they wouldn’t. That said, think hard about the Titan neck before buying. I now have one collecting dust in my spare room. It was lifeless imo. What sound are you going for at the neck? For soloing, I have heard the illuminator do well in a lot of vids.

I have the Illuminator in the neck of my San Dimas and yes it works very well for soloing
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

I pair my X2N with a D Activator X and it works really well together. This is in my basswood Ibanez RG2570 Prestige.
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

Does romeo put a tonezone bridge pickup in the neck? Or is there a neck version?

Thanks for all tge help, guys!
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

I don't believe there is a neck version. It's still lower output than the X2N.
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

I’m going to get a Jackson Warrior in a few months hopefully and will go for either Liquifire or Air Norton or imperium while going for an X2N in the bridge
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

I kinda remember reading neck pickups aren’t f-spaced. I’ll be putting it in the neck of an ibanez. I guess i shouldn’t get the f-spaced version, correct?
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

I too can recommend pairing the X2N with a D Activator X neck (output 300). I originally paired my X2N with The Tone Zone (output 375) in my self-built guitar on the recommendation of a guitar shop guy back in 1993. It stayed that way for about 15 years, but I was never fond of it. The guitar is mahogany with maple/ebony set neck and the difference in tone was too much. IMO the D Activator X is a better EQ pairing and they, of course, match each other in looks too. As they are both bar magnet type pickups they accommodate all string spacings, neck or bridge.
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

Can anyone recommend a Dimarzio Neck Pup for liquid like leads and cleans
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

The ibanez i want doesn’t have a trem. The bridge is a Gibraltar Standard and the Nut Width is 1.692.

Is f-spaced still recomended for the neck position?
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

Yes. The Gibraltar Standard is still trem-spaced.

Ok. Very good!! I think i’m gonna go the michael romeo route and pair an x2n with a tonezone. I can just imagine how deadly the combo will be, realizing how intense the tonezone is in the bridges of two of my other guitars. Thank you for all the advice guys, appreciate it big time!!
 
Last edited:
Re: Dimarzio x2n (bridge) paired with titan (neck)

Just realizing now—- the guitar i was is hsh.

If i get a tonezone (neck) and an x2n (bridge) does anyone here have a singlecoil neck pickup they’d suggest for shred?
 
Re: Dimarzio x2n (bridge) paired with titan (neck)

True single coil? A Duncan Quarter Pound is nice and hot and would match well.
 
Back
Top