Dimebucker Pickup Help!!!!!

[DeanMLX]

Alright i have dean dimebag MLX and i cant get the dime bucker to work in it i need to know the wire placement because the directions suck!!!! ive got a braided wire and black, red, green !!!!! HELP ME!

 

[John Wymore]

Re: Dimebucker Pickup Help!!!!!

See if this helps you out ....

http://www.seymourduncan.com/support/schematics/2hb_1vol_2tones_3way.html

The bare shielding wire also needs to go to ground.

 

[Zerberus]

Re: Dimebucker Pickup Help!!!!!

....ive got a braided wire and black, red, green !!!!! HELP ME!

And a white

 

[Artie]

Re: Dimebucker Pickup Help!!!!!

See if this helps you out ....

http://www.seymourduncan.com/support/schematics/2hb_1vol_2tones_3way.html

The bare shielding wire also needs to go to ground.

As luck would have it, you picked one of the few diagrams with a "typo".
The ground is missing from the volume control.

DeanMLX; if you use that diagram, connect a jumper from the unused lug of the volume control to ground.

I wish the SD folks would fix that.

Artie