Does CTS make a push/pull for 3/8" holes like an SG?

[Fusion1]

I know this was discussed before, but I saw there was a generic push/pull on Guitar Electronics.com and the height was 1", which just so happens to be the same depth as the SG control cavity. I would prefer CTS pots, but the only push/pull CTS I have seen was for long shaft Les Paul guitars.

Thanks.

 

[jeremy]

Re: Does CTS make a push/pull for 3/8" holes like an SG?

i have some short shaft p/p cts pots in a guitar so they must be avaviable, not sure where. lew, you carry these things?

 

[rspst14]

Re: Does CTS make a push/pull for 3/8" holes like an SG?

I'd be interested in knowing where you got them. I'm pretty sure CTS only makes the long shaft SPST push/pull pots. I've never seen a CTS pot with a DPDT push/pull switch. What guitar do you have them in, and are they 500k or 250k?

Ryan

 

[jeremy]

Re: Does CTS make a push/pull for 3/8" holes like an SG?

they are 500k and i have no idea where the came from. i bought the guitar with them in there, but its got a tiny little stamped cts

 

[Lewguitar]

Re: Does CTS make a push/pull for 3/8" holes like an SG?

Hi Guys, Yes I stock push/pull pots in 250K and 500K for $9.00 but they are not 3/8" diameter shaft...they're the smaller diameter metric shaft. They work fine in a 3/8" hole as long as you use the lock washer that's provided. I've never installed one in a Gibson Les Paul but they work just fine in Epiphone Les Pauls. I'll use them to replace the two tone controls and then a guy can split each pickup individually. Thanks for the plug Jeremy!

Lew

 

[BachToRock]

Re: Does CTS make a push/pull for 3/8" holes like an SG?

Lew... what brand are they?

 

[Lewguitar]

Re: Does CTS make a push/pull for 3/8" holes like an SG?

Lew... what brand are they?

I don't know who actually makes them but they're the Allparts pots...I buy them by bulk, 50 or so at a time. They measure 1" depth. Maybe they're the same pots Guitar Electronics offers. They work just fine whatever they are and seem to last a long time. Lew

 

[Lewguitar]

Re: Does CTS make a push/pull for 3/8" holes like an SG?

Here's a picture...