ducbucker neck noise in series wiring

[Vampirock]

Hi does anyone know can a duckbucker wired in series?cause mine was so noisy when wired in series,but when I changed to parallel the noise/hum are gone,I love the full power sound from series wiring,can I stay in series mode without a hum(dont reccomend me for noise gate haha)?already checked all the ground wiring and it was okay in all position

 

[marcello252]

It seems strange, if you get noise you're probably putting in phase the two noise components but the two signals would be out of phase (maybe). just for curiosity, have you tried reversing one of the coil wiring?

 

[Vampirock]

I dont know what you mean by "reversing one of the coil wiring?I agree my case is very strange,before I found a way to eliminate the hum by parallel wiring I already tried many ways and the noise still there

 

[hamerfan]

Tell us which wires you connected for the series link.

 

[Vampirock]

black to switch,red+white soldered and tape together,green+bare to ground pot

 

[hamerfan]

In rare cases we saw wrong factory made internal wirings.
​​​​ Just for shit and giggles try

black to switch,red+Green soldered and tape together,white+bare to ground pot

If the hum is gone, it's a factory mistake.

 

[Vampirock]

That is interesting to try,thanks