BenPerkins
New member
Hi, I read somewhere that the wires are reversed on Duncan Designed pickups. Can someone elaborate on which wires are reversed? For reference, I have a set of DD HB103’s.
Thank you
Thank you
Last edited:
Duncan Designed wiring (reversed?)
- Thread starter BenPerkins
- Start date
Gstring
Active member
Re: Duncan Designed wiring (reversed?)
Have no experience with DD single coils but DD humbuckers are wired in reverse order. This .of course makes no difference if you are installing a pair but if you are wiring one with an SD or most other brands just treat the hot wire as the circuit ground and the ground as the hot wire. This of course is if the bucker is in series (standard mode) . If you are trying out a more complex wiring .you will have to think a little bit outside the box. For example with Arties coil swap mod you would probably need to swap the inner coil of one pup with the outer coil of the other ,which might be an interesting experiment.
Have no experience with DD single coils but DD humbuckers are wired in reverse order. This .of course makes no difference if you are installing a pair but if you are wiring one with an SD or most other brands just treat the hot wire as the circuit ground and the ground as the hot wire. This of course is if the bucker is in series (standard mode) . If you are trying out a more complex wiring .you will have to think a little bit outside the box. For example with Arties coil swap mod you would probably need to swap the inner coil of one pup with the outer coil of the other ,which might be an interesting experiment.
Similar threads
