Duncan Jazz Neck w/ A3 and Screamin Demon Trembucker Cheap!

chickencoop

New member
These were in a project guitar I recently bought (then sold) from forum member Mark Cearlock and I was going to keep these, but I'm trying to scrape together some more $ to finish a different project.

Mark replaced the stock A5 mag in the Jazz with an A3 and the baseplate on the Screamin Demon with one from "GB Pickup Co.". The Jazz neck HB has about 10 inches of lead and says "Seymour Duncan" while the Screamin Demon does not, but obviously has the hex row on top and flathead poles on the bottom and has about 5 inches of lead.

Both are in decent cosmetic shape with some surface scratches.

I'm pretty new here (longtime lurker), but I have 100% feedback on ebay as koj-dogg (note the hyphen), plus a ton of good deals on HC, TGP, Home Recording BBS, TOMB, and the ReRanch as kojdogg and on Gearslutz as chickencoop.

Selling as a set for the ridonkulous price of $70 shipped to the US. Would also trade these + cash for a Carvin replacement bolt on neck.

IMG_0004.jpg
 
Last edited:
Re: Duncan Jazz Neck w/ A3 and Screamin Demon Trembucker Cheap!

I can vouch for the demon, I got it with the stock baseplate also. ( I didn't swap the baseplate) It had been drilled for a direct mount usage, and was included when I recived the pickup.
 
Re: Duncan Jazz Neck w/ A3 and Screamin Demon Trembucker Cheap!

hey man i'll trade you an a5 for my a3 that i gave to mark. i'm jonesin' for another a3 but i don't have any cash in the bank:(
 
Re: Duncan Jazz Neck w/ A3 and Screamin Demon Trembucker Cheap!

I'll take them both and then work out a deal with SRS. Everybody wins. ;)
 
Re: Duncan Jazz Neck w/ A3 and Screamin Demon Trembucker Cheap!

SOLD! It looks like there's something like a 3 way baseball trade going on here too :)
 
Back
Top