Epiphone P90 Wiring Question

CajunBlues

New member
So I went to re-install the original p90 pikcups in my Epi LP Special last night... and I noticed that there are two wires -- a red wire and a white wire. Do both of these wires get soldered to the pot ? What is the difference between these two wires ?
 
Re: Epiphone P90 Wiring Question

Er, last time I checked, the Epi LP Spl came with dual humbuckers NOT P90s.

How many wires altogether? Two (red and white) or three (red, white + bare screen/ground)?

If you have a DC resistance meter, take readings between bare and red then bare and white. Whichever gives the higher reading is the "hot" output cable. The other is the coil split.
 
Re: Epiphone P90 Wiring Question

Red is the hot, and the white and bare get grounded, i believe.

i yanked out the ones in my '56GT... tho they are very much better than most.
 
Back
Top