Ernie Ball cobalt strings
- Thread starter mojosman
- Start date
JeffB
Let it B
Re: Ernie Ball cobalt strings
They are bright and clear and do increase output. I do not think.they sound any better than other EB offerings, just different..more like stainless steel strings.
Hated , hated,.hated the feel of fthe wounds, and they actually irritated my fingers, but alot of chemicals and whatnot do that to my skin. Regardless there was a ton of drag on the wounds and a rough feel as if the wraps are spaced too far apart.
Big EB string fan..love the standard, RnR,.and titanium slinkys, but I would not use the Cobalts if I got em for free.
They are bright and clear and do increase output. I do not think.they sound any better than other EB offerings, just different..more like stainless steel strings.
Hated , hated,.hated the feel of fthe wounds, and they actually irritated my fingers, but alot of chemicals and whatnot do that to my skin. Regardless there was a ton of drag on the wounds and a rough feel as if the wraps are spaced too far apart.
Big EB string fan..love the standard, RnR,.and titanium slinkys, but I would not use the Cobalts if I got em for free.
Last edited:
BlueTalon
New member
Re: Ernie Ball cobalt strings
If you're using the term "slinkies", I'm assuming you're a guitar player. I was talked into putting a set of Cobalts on 5-string bass. My impression: Meh. Nothing special. I won't be getting any more -- not because they are bad strings, they're not -- but because I normally use D'Addario and DR strings, which I like better and are less expensive.
If you're using the term "slinkies", I'm assuming you're a guitar player. I was talked into putting a set of Cobalts on 5-string bass. My impression: Meh. Nothing special. I won't be getting any more -- not because they are bad strings, they're not -- but because I normally use D'Addario and DR strings, which I like better and are less expensive.
PeterJCruz
New member
Re: Ernie Ball cobalt strings
I haven't tried them.. but they are still "new" so to speak and I was wanting to get more information on how these new Cobalt strings wear on frets. If it sounds a little better.. but chews up frets it's not worth the trouble or expense.. But I've not heard one way or the other on the fret wear with them.
I haven't tried them.. but they are still "new" so to speak and I was wanting to get more information on how these new Cobalt strings wear on frets. If it sounds a little better.. but chews up frets it's not worth the trouble or expense.. But I've not heard one way or the other on the fret wear with them.
Petrovsk Mizinski
New member
Re: Ernie Ball cobalt strings
" He thinks they really woke his pick-ups up" lolz.
He's kidding himself if he thinks they really make that much difference. It's a change of strings, not changing to a different amp, speakers or cabinet, geez.
They are a bit brighter but that's about it. The added brightness may not even necessarily be a good thing with one's particular guitar/amp setup.
I do find them to last 3-4 times longer than normal nickel strings which at least justifies the higher price.
They are harder on frets, like stainless steel strings, which isn't a problem if you use stainless steel frets, however after a period of time you might begin to notice accelerated fret wear on nickel steel frets.
" He thinks they really woke his pick-ups up" lolz.
He's kidding himself if he thinks they really make that much difference. It's a change of strings, not changing to a different amp, speakers or cabinet, geez.
They are a bit brighter but that's about it. The added brightness may not even necessarily be a good thing with one's particular guitar/amp setup.
I do find them to last 3-4 times longer than normal nickel strings which at least justifies the higher price.
They are harder on frets, like stainless steel strings, which isn't a problem if you use stainless steel frets, however after a period of time you might begin to notice accelerated fret wear on nickel steel frets.
CloneRanger
New member
Re: Ernie Ball cobalt strings
Maybe there's no point in reminding you that the 'Co' in AlNICo is cobalt, like the 'Ni' is nickel. The strings are as integral to the transduction system as the magnets and the coil wire. Changes in magnet alloy are audible, so it makes complete sense that changing from nickel wounds to cobalt wounds, might be compared to the audible change going from say, an A2 to an A8 mag.
Maybe there's no point in reminding you that the 'Co' in AlNICo is cobalt, like the 'Ni' is nickel. The strings are as integral to the transduction system as the magnets and the coil wire. Changes in magnet alloy are audible, so it makes complete sense that changing from nickel wounds to cobalt wounds, might be compared to the audible change going from say, an A2 to an A8 mag.
mojosman
New member
Re: Ernie Ball cobalt strings
Thanks everyone for the input. I figured with all the players and tone gurus on this board I would get some good opinions. I'm building a Partscaster and based on my friend going say crazy over these strings I thought I would try them out. I just wanted to hear some other opinions. I usually play GHS Nickle Rockers, but I'm open to try new stuff when it comes out if its an improvement sound-wise.
Yes. I play guitar. I hadn't even seen these strings out in a bass version. I should have specified, but to be honest I didn't even think about bass strings. Most bass players I know keep strings on their instruments way longer than guitar players do. I wonder if the Titanium version of the Ernie Ball strings would be a good thing for bass players. I guess the Titanium coating resists getting cruddy over time. Seems like that would be good if you don't change strings frequently.
Thanks everyone for the input. I figured with all the players and tone gurus on this board I would get some good opinions. I'm building a Partscaster and based on my friend going say crazy over these strings I thought I would try them out. I just wanted to hear some other opinions. I usually play GHS Nickle Rockers, but I'm open to try new stuff when it comes out if its an improvement sound-wise.
Yes. I play guitar. I hadn't even seen these strings out in a bass version. I should have specified, but to be honest I didn't even think about bass strings. Most bass players I know keep strings on their instruments way longer than guitar players do. I wonder if the Titanium version of the Ernie Ball strings would be a good thing for bass players. I guess the Titanium coating resists getting cruddy over time. Seems like that would be good if you don't change strings frequently.
Re: Ernie Ball cobalt strings
Picked up a 12 pack of them from the EB table at the last Great American Guitar Expo for cheap. I like 'em. Have been switching between EB reg. Slinkys and these and there is a difference. Playability seems to have stayed the same but there is a change in the tone. For the better in the case of my playing and style. YMMV.
Picked up a 12 pack of them from the EB table at the last Great American Guitar Expo for cheap. I like 'em. Have been switching between EB reg. Slinkys and these and there is a difference. Playability seems to have stayed the same but there is a change in the tone. For the better in the case of my playing and style. YMMV.
Myaccount876
Amira-Maker
Re: Ernie Ball cobalt strings
They're brighter, and when they get used, THEY GET USED; as-in rusty barbed wire. Cool packaging, iron though very magnetic, isn't a good idea for instrument strings because iron RUSTS.
They're brighter, and when they get used, THEY GET USED; as-in rusty barbed wire. Cool packaging, iron though very magnetic, isn't a good idea for instrument strings because iron RUSTS.
Kamanda~SD
New member
Re: Ernie Ball cobalt strings
Don't really understand you here...have had these strings on one of my guitars for over a month now with no rust (and this guitars been gigged and to almost every practice since). Although I can see the plain ones rusting eventually...as does any string, because metals rust, not just iron. Nickel, bronze, cobalt...
Don't really understand you here...have had these strings on one of my guitars for over a month now with no rust (and this guitars been gigged and to almost every practice since). Although I can see the plain ones rusting eventually...as does any string, because metals rust, not just iron. Nickel, bronze, cobalt...
LonePhantom
New member
Re: Ernie Ball cobalt strings
I've used Cobalts for over a year now on my guitars. I've left sets for up to two months (maybe a little more sometimes) when a string breaks and there's never any rust. They still are pretty shiny.
I've used Cobalts for over a year now on my guitars. I've left sets for up to two months (maybe a little more sometimes) when a string breaks and there's never any rust. They still are pretty shiny.
Falloffthebonetone
New member
Re: Ernie Ball cobalt strings
Yeah when I used them they wore out really quick like, and my fingers are usually really friendly to strings. They feel "stretchier" if that makes sense. Like loose. I feel like I could use my old strings and tweak my amp a little to get the same difference, I dunno. a hint more presence, that's about it. Not for me.
Yeah when I used them they wore out really quick like, and my fingers are usually really friendly to strings. They feel "stretchier" if that makes sense. Like loose. I feel like I could use my old strings and tweak my amp a little to get the same difference, I dunno. a hint more presence, that's about it. Not for me.
STRATDELUXER97
Stratoblaster Tone Meister
Re: Ernie Ball cobalt strings
I tryed a set and really liked them,but for the amount of money spent on the cobalts,I'm still a user of D'Addario and the EB RNR strings..
I tryed a set and really liked them,but for the amount of money spent on the cobalts,I'm still a user of D'Addario and the EB RNR strings..
Butch Snyder
ObsoleteChickenPickingologist
Re: Ernie Ball cobalt strings
I tried my first set, 10's. I don't really like them. I have heard others say they're "slinkier". To me, they feel stiffer and the wound strings feel rougher. I will use them until they are done; but will go back to my Regular Slinky brand. They are almost 3x the price anyway...
I tried my first set, 10's. I don't really like them. I have heard others say they're "slinkier". To me, they feel stiffer and the wound strings feel rougher. I will use them until they are done; but will go back to my Regular Slinky brand. They are almost 3x the price anyway...
Nacho8807
New member
Re: Ernie Ball cobalt strings
I agree with them being a lot brighter, and having noticibly different feel on the fingers. A lot more "scratch" noise when moving your hand accross them. But after going back and forth between these and a couple D'Addario sets, I appreciate how alive they sounded. I totally get the "waking" of his pickups. It really made a difference to me, and I like it a lot. They do take longer to break in, and they don't last as long as some others, but they're the only string I've used that makes a difference in tone to my ears, and that's why I'll continue to use them.
I agree with them being a lot brighter, and having noticibly different feel on the fingers. A lot more "scratch" noise when moving your hand accross them. But after going back and forth between these and a couple D'Addario sets, I appreciate how alive they sounded. I totally get the "waking" of his pickups. It really made a difference to me, and I like it a lot. They do take longer to break in, and they don't last as long as some others, but they're the only string I've used that makes a difference in tone to my ears, and that's why I'll continue to use them.
Luke Duke
PRSlustologist
Re: Ernie Ball cobalt strings
I use them on guitars that need a little extra top end brilliance. Overall I think they are good, but I'm not switching over all my guitars. I had I tried them on my 25th anniversary EBMM and with practice and gigging I didn't pull them off for 4mos....yes 4mos. They didn't look bad or sound terrible yet but I could tell they had lost their edge. On that guitar I'm stickin gto nickel-steel. For my Gretsch with a a TV Jones Classic+ in the bridge I wanted to make up a little lost presence and have switched to them for the time being...though the other day I thought it sounded overly bright. I also put them on my EBMM Dark Lord because I wanted the presence that I believe that I lose with 250K pots and humbuckers.
I use them on guitars that need a little extra top end brilliance. Overall I think they are good, but I'm not switching over all my guitars. I had I tried them on my 25th anniversary EBMM and with practice and gigging I didn't pull them off for 4mos....yes 4mos. They didn't look bad or sound terrible yet but I could tell they had lost their edge. On that guitar I'm stickin gto nickel-steel. For my Gretsch with a a TV Jones Classic+ in the bridge I wanted to make up a little lost presence and have switched to them for the time being...though the other day I thought it sounded overly bright. I also put them on my EBMM Dark Lord because I wanted the presence that I believe that I lose with 250K pots and humbuckers.
Gone_Shootin
New member
Re: Ernie Ball cobalt strings
I tried a couple sets & hated them. Too bright & I broke 'em too easily.
I tried a couple sets & hated them. Too bright & I broke 'em too easily.
Similar threads
