F-Spaced ToneZone in PG, Sperzel Lockling 3x3 tuners, Cheap Strat Neck

[chickencoop]

I have an F-spaced Dimarzio Tone Zone SOLD!
I have a set of 3x3 Sperzel Locking Tuners in nickel for SOLD!

I also have a Golden Gate (Saga IIRC) maple/RW strat neck with a paddle headstock. It's clear coated and has been reamed (not super precisely, but nothing bad) for modern sized tuners. This has never been drilled or installed (obviously). $40 shipped to the lower 48.

EDIT: I would happily trade the neck for either a set of Graph Tech import strat saddles or 4 new/unused CTS 500K pots and an unused either Switchcraft L 3 way switch or CRL 3 way Tele type switch, or a 2 HB Strat guard instead of the switch.

Specs on the neck:
Each neck is made from select Canadian Maple
Clear finish, Rosewood fingerboard with M-O-P dot inlays for S-style guitar (Strat neck pocket)
Pre-fretted with truss rod installed
Headstock requires final shaping for that personal touch Holes pre-drilled for tuner installation
Scale length: 25-1/2" Width at nut: 1-11/16" Width at 22nd fret position: 2-3/16" Fretboard radius: 12" Fretwire: .040" high x .100" wide Nut slot: 1/8" wide

Fretwire: .040" high x .100" wide Nut slot: 1/8" wide

 

[MetalManiac]

Re: F-Spaced ToneZone in PG, Sperzel Lockling 3x3 tuners, Cheap Strat Neck

I'm supposed to just send someone 40 bucks I don't know with only one post ?
I would like that TZ though.

 

[chickencoop]

Re: F-Spaced ToneZone in PG, Sperzel Lockling 3x3 tuners, Cheap Strat Neck

understandable. I have tons of good deals on TGP and HC as kojdogg, 100% feedback on ebay as koj-dogg and even have a few good deals here. I also have a bunch of good deals on recording forums I can refer you to if that helps.

 

[TheLivingDead]

Re: F-Spaced ToneZone in PG, Sperzel Lockling 3x3 tuners, Cheap Strat Neck

I'd snap up that TZ but I have nothing to put it in atm. Good luck on the sale, chickencoop.

 

[Willybomb]

Re: F-Spaced ToneZone in PG, Sperzel Lockling 3x3 tuners, Cheap Strat Neck

Registering interest in the Sperzels if you'll ship to Australia.

 

[chickencoop]

Re: F-Spaced ToneZone in PG, Sperzel Lockling 3x3 tuners, Cheap Strat Neck

I'd really like to keep shippind domestic but I'll keep it in mind and thanks for the interest!

 

[chickencoop]

Re: F-Spaced ToneZone in PG, Sperzel Lockling 3x3 tuners, Cheap Strat Neck

Bump: Tonezone and Sperzels sold!

I would happily trade the neck for either a set of Graph Tech import strat saddles or 4 new/unused CTS 500K pots and an unused either Switchcraft L 3 way switch or CRL 3 way Tele type switch, or a 2 HB Strat guard instead of the switch. Also would trade for a set of 6 Inline locking tuners in chrome or nickel.

 

[Kingdom Guitarworks]

Re: F-Spaced ToneZone in PG, Sperzel Lockling 3x3 tuners, Cheap Strat Neck

I've got a tortoise shell dual humbucker warmoth guard with push pull pots and 3 way switch, wired up except for pickups.
Trade for the neck?

 

[chickencoop]

Re: F-Spaced ToneZone in PG, Sperzel Lockling 3x3 tuners, Cheap Strat Neck

If they were regular, full-sized pots I would be interested, but unfortunately I can't use the push pulls...