fat tele viring help!!!

[man on mir]

hey guys this is my first post,i really need your help!
basically i need a diagram for wiring a sh-55 seth lover neck humbucker(4 conductor) and a telecaster vintage lead stack using the super switch from stew mac and 500k pots,i want to be able to have the split bucker sounds,thanks keith.

 

[wasteofo2]

Re: fat tele viring help!!!

What positions do you want besides the neck and bridge humbuckers alone, and how many positions does your switch have?

 

[man on mir]

Re: fat tele viring help!!!

What positions do you want besides the neck and bridge humbuckers alone, and how many positions does your switch have?

i really want to have....
1) bridge alone
2) bridge and neck split
3) bridge and full bucker neck
4) neck single coil
5) neck full bucker

it's the stew mac five way four pole super switch,with six lugs per pole

the stack is four conductor but i don't want it to do anything other than be a quiet stacked bridge pickup
thanks for the help

 

[man on mir]

Re: fat tele viring help!!!

okay so i found this diagram in the archive,but the colour coding is different to seymour pups,plus i'm not really sure whats going on with the pots wiring cause you can't see it.
can someone tell me whats happening here and translate the colours into seymour's.
thanks

here's the link http://www.guitar-mod.com/hs_tele.gif




__________________
http://www.guitar-mod.com

 

[man on mir]

Re: fat tele viring help!!!

sorry to be a pain guys but i'm lost!
can anyone help me? anything at all would be great,thanks
also why do fender use a 270k resistor on the american fat tele?