Fender Duo Sonic Wiring Diagram

[Chuckie3666]

I was wondering if you could help me,I bought a reissue Fender Duo Sonic(Oct 7, 1993) With a Crate GX-30M Amp for $40.00 for my 11 yr old son,At the time I thought this was a good deal.Now here comes the sad part,The pickups
neither one work,I do have 1- Fender American Strat Hot Alnico 3 Neck position,& 1- Seymour Duncan Hot Rail Bridge position. My question is Does anyone know how to wire These 2 Pickups in the above stated positions using the Factory Volume & Tone pots because I've already replaced everything that is how I figured out the pickups are the culprits.
Any suggestions would deeply be appreciated.
Thanks chuckie3666@yahoo.com

 

[idsnowdog]

Re: Fender Duo Sonic Wiring Diagram

For the hotrails solder the red/white together and tape off. Green and bare go to the ground and the black goes to the hot lug on the switch. If the neck pickup is two conductor either conductor will work, but you may need to swap the wires to get them in the proper phase for the middle position on the switch.

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=duo