muttznmongrelz
New member
Both are currently offered on an infamous auction site...but if a forum member is interested...just pm me. Looking for $200 per item plus shipping.
Neck includes a new R3 Nut in Black and Original Fender Micro Tilt Neck Plate with Heavy Duty Mounting Screws...
Genuine 1988 Fender Stratocaster Maple Neck
Made In Japan
Serial Number E811127
Maple Neck
Maple Fingerboard
12" Fingerboard Radius
25-1/2" Scale Length
22 Frets
1 11/16" Nut Width
2 3/16" Heel with Fender Micro Tilt - fits Standard Fender Spaced Neck Pockets ( Fender Warmoth Kramer USACG Mighty Mite All Parts etc )
Condition: Very Good (See Pictures)
Aspects of the neck: Minor fretwear, minor headstock dings, fretboard wear, minor impressions on back of neck profile, back of neck/heel has been sanded to a smooth satin finish and cleaned and oiled for comfort & playability
Includes: New R3 Top Mount Nut in Black w/attachment screws and Original Fender Neck Plate w/Micro Tilt Feature with factory heavy duty attachment screws
Disclosure: Due to age of item and the fact that it is used, the wide variances of body manufacturers out there and the infinite applications in which this neck may be used by the buyer...this item is sold "as is" with no returns/no refunds. Ask any/all questions you may have. Thanks for looking!
NEW PICTURES ADDED FARTHER DOWN IN THE THREAD
Body includes ONLY the Floyd Inserts & Posts as installed...
2003 WARMOTH STRATOCASTER SHOWCASE BODY
2 PIECE ALDER
WARMOTH CANDY TANGERINE FINISH
TOP MOUNT FLOYD ROSE DRILLED (INSERTS/POSTS INCLUDED)
STANDARD VINTAGE STRATOCASTER PICKUP ROUTING FOR 3 SINGLE COILS AND STANDARD CONTROL LAYOUT
Pics #2 & #3 are most recent, the body no longer has the "SRV" Holographic Decals.
PicS # 1 & #3 are most representative of the color..."CANDY TANGERINE...really a beautiful color if you've ever seen it in person, used by both Fender & Charvel over the last few years and very popular on the Custom Car Circuit. Very reactive dependent upon the lighting, as you can tell from my photos.
Would work well with necks by: WARMOTH FENDER KRAMER USACG MIGHTY MITE ALLPARTS SQUIER ETC
Condition: Very Good (See Pictures) body has usual light play wear from use over the last 6 years and a small nick in the treble cutaway from a brass slide hitting it as well as a separate paint chip in the same area from a factory paint defect (most likely the reason it was in the "SHOWCASE"). I will post pics of these flaws later on. Other than that, it's CLEAN.
Notice: This auction is for the BODY WITH INSERTS & POSTS ONLY...no other parts are included.
Disclosure: Due to the fact that it is used, the wide variances of neck/parts manufacturers out there and the infinite applications in which this neck may be used by the buyer...this item is sold "as is" with no returns/no refunds. Ask any/all questions you may have. Thanks for looking!
NEW PICTURES ADDED FARTHER DOWN IN THE THREAD
Thanks for looking.
Neck includes a new R3 Nut in Black and Original Fender Micro Tilt Neck Plate with Heavy Duty Mounting Screws...
Genuine 1988 Fender Stratocaster Maple Neck
Made In Japan
Serial Number E811127
Maple Neck
Maple Fingerboard
12" Fingerboard Radius
25-1/2" Scale Length
22 Frets
1 11/16" Nut Width
2 3/16" Heel with Fender Micro Tilt - fits Standard Fender Spaced Neck Pockets ( Fender Warmoth Kramer USACG Mighty Mite All Parts etc )
Condition: Very Good (See Pictures)
Aspects of the neck: Minor fretwear, minor headstock dings, fretboard wear, minor impressions on back of neck profile, back of neck/heel has been sanded to a smooth satin finish and cleaned and oiled for comfort & playability
Includes: New R3 Top Mount Nut in Black w/attachment screws and Original Fender Neck Plate w/Micro Tilt Feature with factory heavy duty attachment screws
Disclosure: Due to age of item and the fact that it is used, the wide variances of body manufacturers out there and the infinite applications in which this neck may be used by the buyer...this item is sold "as is" with no returns/no refunds. Ask any/all questions you may have. Thanks for looking!
NEW PICTURES ADDED FARTHER DOWN IN THE THREAD
Body includes ONLY the Floyd Inserts & Posts as installed...
2003 WARMOTH STRATOCASTER SHOWCASE BODY
2 PIECE ALDER
WARMOTH CANDY TANGERINE FINISH
TOP MOUNT FLOYD ROSE DRILLED (INSERTS/POSTS INCLUDED)
STANDARD VINTAGE STRATOCASTER PICKUP ROUTING FOR 3 SINGLE COILS AND STANDARD CONTROL LAYOUT
Pics #2 & #3 are most recent, the body no longer has the "SRV" Holographic Decals.
PicS # 1 & #3 are most representative of the color..."CANDY TANGERINE...really a beautiful color if you've ever seen it in person, used by both Fender & Charvel over the last few years and very popular on the Custom Car Circuit. Very reactive dependent upon the lighting, as you can tell from my photos.
Would work well with necks by: WARMOTH FENDER KRAMER USACG MIGHTY MITE ALLPARTS SQUIER ETC
Condition: Very Good (See Pictures) body has usual light play wear from use over the last 6 years and a small nick in the treble cutaway from a brass slide hitting it as well as a separate paint chip in the same area from a factory paint defect (most likely the reason it was in the "SHOWCASE"). I will post pics of these flaws later on. Other than that, it's CLEAN.
Notice: This auction is for the BODY WITH INSERTS & POSTS ONLY...no other parts are included.
Disclosure: Due to the fact that it is used, the wide variances of neck/parts manufacturers out there and the infinite applications in which this neck may be used by the buyer...this item is sold "as is" with no returns/no refunds. Ask any/all questions you may have. Thanks for looking!
NEW PICTURES ADDED FARTHER DOWN IN THE THREAD
Thanks for looking.
Last edited:
