MDS
New member
$150+shipping. I'll get pics up soon.
Mike
Stats:
MKS Professional Stage Products has effectively bridged the gap between custom and entry level equipment by producing a modualr design that allows players the ability to customize their own set-up for half the price! The JP-10 Model boasts a 2-tier stairstep design, adjustable PureVolt power supply, durable case, 10-DC power cables, and 10ft AC power cord (IEC plug). The PureVolt power supply is adjustable for stage left & stage right.
Design
Pedal Pad has a durable case that protects expensive effects pedals. Pedals are ready to use instantly and effects settings are not lost between gigs. Pedal Pad has a design that makes set-up for stage left or stage right easy. The design is easily adjusted for larger pedals like Volume and Wah.
Audio
Pedal Pad is perfect for two amp set-up. Hook-up combinations are unlimited! Two auxillary channels provide options for amplifier channel switching and reverb controls or for additional instruments.
Power
Pedal Pad contains a total of 10 DC outputs with cables. Players may convert four of the 9-volt outputs into AC. Three 120-volt AC outputs are also provided. Power filtering creates an impedance mismatch so that unwanted frequencies are reflected back to the AC power network. Incoming AC is thermally fused and pedals are MOV protected against line spikes.
Specifications
Input Voltage: 120 VAC 50/60Hz
Input Current: 6 Amps (fuse protected)
Output Voltage 1: 120 VAC (3 Outputs)
Output Voltage 2: 9 Volts DC (10 Outputs); up to four can convert to 9 Volt AC
DC Current: 1 Amp Total; 100 mA per outlet
Spike Protection: Line to Neutral and Line to Ground
Max. Spike Energy: 70 Joules
Max. Surge Current: 6500 Amps
Max. Clamping Voltage: 680 Volts
Response Time: 1 Nanosecond
Filter Range: Rated Current = IR (A) - 6; L (mH) - 2X1; Between Phases and Neutral Cx (uF) = 0.033; Between Phase and Earth Cy (pF) = 2 x 2500; Leakage Current = IL (mA) - 2 x 0.002
Connections: AC In - IEC style grounded cord (10 Foot); DC Out - 2.1mm (IS), 5.5mm (OS)
Dimensions: L - 30", W - 13 1/4", H - 8"
Accessories
DC24 Power Cables
24", 24 gauge 2.1mm to 2.1mm barrel plugs
RP24 Reverse Polarity Power Cables (intended for use with PureVolt Power Supplies only)
Color coded red for easy identification as a reverse polarity cable.
These cables are wired "tip positive"
24", 24 gauge 2.1mm to 2.1mm barrel plugs
AC Cord
10' IEC 3 pin, 16 awg
Mike
Stats:
MKS Professional Stage Products has effectively bridged the gap between custom and entry level equipment by producing a modualr design that allows players the ability to customize their own set-up for half the price! The JP-10 Model boasts a 2-tier stairstep design, adjustable PureVolt power supply, durable case, 10-DC power cables, and 10ft AC power cord (IEC plug). The PureVolt power supply is adjustable for stage left & stage right.
Design
Pedal Pad has a durable case that protects expensive effects pedals. Pedals are ready to use instantly and effects settings are not lost between gigs. Pedal Pad has a design that makes set-up for stage left or stage right easy. The design is easily adjusted for larger pedals like Volume and Wah.
Audio
Pedal Pad is perfect for two amp set-up. Hook-up combinations are unlimited! Two auxillary channels provide options for amplifier channel switching and reverb controls or for additional instruments.
Power
Pedal Pad contains a total of 10 DC outputs with cables. Players may convert four of the 9-volt outputs into AC. Three 120-volt AC outputs are also provided. Power filtering creates an impedance mismatch so that unwanted frequencies are reflected back to the AC power network. Incoming AC is thermally fused and pedals are MOV protected against line spikes.
Specifications
Input Voltage: 120 VAC 50/60Hz
Input Current: 6 Amps (fuse protected)
Output Voltage 1: 120 VAC (3 Outputs)
Output Voltage 2: 9 Volts DC (10 Outputs); up to four can convert to 9 Volt AC
DC Current: 1 Amp Total; 100 mA per outlet
Spike Protection: Line to Neutral and Line to Ground
Max. Spike Energy: 70 Joules
Max. Surge Current: 6500 Amps
Max. Clamping Voltage: 680 Volts
Response Time: 1 Nanosecond
Filter Range: Rated Current = IR (A) - 6; L (mH) - 2X1; Between Phases and Neutral Cx (uF) = 0.033; Between Phase and Earth Cy (pF) = 2 x 2500; Leakage Current = IL (mA) - 2 x 0.002
Connections: AC In - IEC style grounded cord (10 Foot); DC Out - 2.1mm (IS), 5.5mm (OS)
Dimensions: L - 30", W - 13 1/4", H - 8"
Accessories
DC24 Power Cables
24", 24 gauge 2.1mm to 2.1mm barrel plugs
RP24 Reverse Polarity Power Cables (intended for use with PureVolt Power Supplies only)
Color coded red for easy identification as a reverse polarity cable.
These cables are wired "tip positive"
24", 24 gauge 2.1mm to 2.1mm barrel plugs
AC Cord
10' IEC 3 pin, 16 awg
