Aquired a set of Godin pickups that were in a Godin Flat Five,the pickups are humbuckers with a black metal base plate marked F(neck) and R(bridge) 4 wires-BLACK,RED,GREEN and WHITE,smoke chrome metal covers and adjustable pole pieces.According to a few guitar sites these pickups were made by SCHALLER or SEYMOUR DUNCAN.The numbers are as follows-
NECK-BLACK/RED=7.8 with WHITE/GREEN connected together.
NECK-BLACK/WHITE=4.0 with RED/GREEN connected together.
BRIDGE-BLACK/RED=14.4 with WHITE/GREEN connected together.
BRIDGE-BLACK/WHITE=7.9 with RED/GREEN connected together.
Since I'm not interested in splitting the coils,do I have the option of using either of the above wiring configurations?These pickups are to be installed in a 335 clone hollowbody(2 vol,2 ton,3 way and a varitone switch,12/52 flatwounds for strings.
UPDATE-I just found SD's schematic for my setup,it appears that the set I have are in deed SEYMOUR DUNCANS.
NECK-BLACK/RED=7.8 with WHITE/GREEN connected together.
NECK-BLACK/WHITE=4.0 with RED/GREEN connected together.
BRIDGE-BLACK/RED=14.4 with WHITE/GREEN connected together.
BRIDGE-BLACK/WHITE=7.9 with RED/GREEN connected together.
Since I'm not interested in splitting the coils,do I have the option of using either of the above wiring configurations?These pickups are to be installed in a 335 clone hollowbody(2 vol,2 ton,3 way and a varitone switch,12/52 flatwounds for strings.
UPDATE-I just found SD's schematic for my setup,it appears that the set I have are in deed SEYMOUR DUNCANS.
Last edited:
