Godin XTSA pickup help

[quietworlock22]

Looking to replace the stock pickups in my godin for something a little more hotter output.The pickup combo would be HSH. Looking to playing classic metal like metallica and prog metal like dream theater. Any help would be appreciated.
specs

• Body - Silver Leaf Maple Center with Poplar Wings
• Top - Premium grade veneer of Figured Maple
• Neck - Mahogany
• Fingerboard - Ebony

 

[Benjy_26]

Distortion/SSL-2/PGn would be my choice.

 

[quietworlock22]

Distortion/SSL-2/PGn would be my choice.

Distortions are one of my top choices for bridge. I cant figure out if i need a trembucker or not any suggestions?

 

[Mincer]

Sentient and Pegasus. It can do a range of metal from standard to lower tunings without mushing out.

 

[Despair]

PATB-2b Parallel Axis Distortion bridge pickup. STK-S4m in middle, & PATB-1n in neck. (PA-STK1n would match pickup appearance in middle, but you'd likely have to widen the middle pickup route a bit for the different coil shape, and most people tend to avoid wanting to do that on a pretty top.)

Odds are it's Trembucker. Most guitars are Fender or Floyd spaced. You can measure center of low E to center of high E in millimeters. If it's 49-50, go with an SH or Gibson spacing, if it's 51mm or more, go with a Trembucker. Pickups for Fender or Floyd bridges are typically 52-53mm, and those are more common, even from Gibson/Epiphone than classic Gibson spacing.