Good Karma Thread
- Thread starter The Dali
- Start date
The Dali
MeltedClockologist
Re: Good Karma Thread
ok, below are a few pictures of what I have to offer:
- Strat SSS white pickguard
- Telecaster BWB pickguard
- Telecaster WBW pickguard
- Strat SSS shield
- Three white trem covers. These are imports (ie, screw spacing)
- Squier Neckplate. No screws
- Fender Highway 1 bridge with hardware (a little rusty)
- Pair of mini-humbucker rings
- Four Seymour Duncan single-coil covers (three are bright white, one is yellowy)
- two black single-coil covers (no holes) ONE TAKEN
- Gibson USA trussrod cover
- import 5-way switch
- Bournes 500k push-pull pot (new) TAKEN
- 2 Strat input jacks
- strat VTT knobs (very relic'd yellowed)
- 4 black slector switch tips for Strat. One White
- White strat trem-bar tip
- 10 Fender-issued caps (.047)
- 6 HUGE caps for single-coils (.047). They are likely for amps... I bought and didn't notice the size
- SX Gigbag TAKEN
ok, below are a few pictures of what I have to offer:
- Strat SSS white pickguard
- Telecaster BWB pickguard
- Telecaster WBW pickguard
- Strat SSS shield
- Three white trem covers. These are imports (ie, screw spacing)
- Squier Neckplate. No screws
- Fender Highway 1 bridge with hardware (a little rusty)
- Pair of mini-humbucker rings
- Four Seymour Duncan single-coil covers (three are bright white, one is yellowy)
- two black single-coil covers (no holes) ONE TAKEN
- Gibson USA trussrod cover
- import 5-way switch
- Bournes 500k push-pull pot (new) TAKEN
- 2 Strat input jacks
- strat VTT knobs (very relic'd yellowed)
- 4 black slector switch tips for Strat. One White
- White strat trem-bar tip
- 10 Fender-issued caps (.047)
- 6 HUGE caps for single-coils (.047). They are likely for amps... I bought and didn't notice the size
- SX Gigbag TAKEN
Last edited:
King IzzO)))
Ultimate Kitten Puncher
Re: Good Karma Thread
Dali, can I get that plain neck plate off of you?
Dali, can I get that plain neck plate off of you?
The Dali
MeltedClockologist
Re: Good Karma Thread
Neck plate, Warmoth decal, gigbag, and black strat covers gone.
By the way, I'd be looking for 6-inline tuners and gold straplocks
Neck plate, Warmoth decal, gigbag, and black strat covers gone.
By the way, I'd be looking for 6-inline tuners and gold straplocks
Last edited:
Andrew Lamprecht
Minion of One
Re: Good Karma Thread
My Sovteks are gone, still looking for pickup screws.
My Sovteks are gone, still looking for pickup screws.
MetalManiac
Li'l Junior Member
Re: Good Karma Thread
4 X JJ 6V6 tubes. BIG CAVEAT- All fo these tubes are missing their plastic tube guide nipple or wahetevr its called. ALSO- One of these tubes is shorted, and if you can't test them, itll fry your amp. Otherwise yuoll most liely get three very strong and good usable JJ6v6's.
4 X JJ 6V6 tubes. BIG CAVEAT- All fo these tubes are missing their plastic tube guide nipple or wahetevr its called. ALSO- One of these tubes is shorted, and if you can't test them, itll fry your amp. Otherwise yuoll most liely get three very strong and good usable JJ6v6's.
MetalManiac
Li'l Junior Member
Re: Good Karma Thread
This is a good thread, but Id like to see "credits" and also maybe "valued credits..in other words, if you give away something, you have a credit to claim something..or something thats of equal value.
I was thinking about posting a real nice gogbag, but Im sure it'd be snatched quickly , and then what can I claim for it?? Better to deal it at auction and get the value of the item to purchase what i really want/need.
Think of this- if there were "valued credits" or something, where you pick the value of the time you are exchanging, then I would post my new Gibson RD for 800 credits ( I want 800 dollars value from it)..
This is a good thread, but Id like to see "credits" and also maybe "valued credits..in other words, if you give away something, you have a credit to claim something..or something thats of equal value.
I was thinking about posting a real nice gogbag, but Im sure it'd be snatched quickly , and then what can I claim for it?? Better to deal it at auction and get the value of the item to purchase what i really want/need.
Think of this- if there were "valued credits" or something, where you pick the value of the time you are exchanging, then I would post my new Gibson RD for 800 credits ( I want 800 dollars value from it)..
The Dali
MeltedClockologist
bungalowbill
Luckybastidologist
Re: Good Karma Thread
Bro....can't you just let it be what it is? If you don't want to get in it, then don't.
Sometimes, believe it or not, giving is it's own reward.
Bro....can't you just let it be what it is? If you don't want to get in it, then don't.
Sometimes, believe it or not, giving is it's own reward.
MetalManiac
Li'l Junior Member
bungalowbill
Luckybastidologist
Andrew Lamprecht
Minion of One
Re: Good Karma Thread
I also have a 12AU7 that does not have anything but CHINA on it. I have no use for it so anyone who wants/needs it can have it.
I also have a 12AU7 that does not have anything but CHINA on it. I have no use for it so anyone who wants/needs it can have it.
teleguru
New member
Re: Good Karma Thread
- chrome 6 inline (ping?) closed gear tuners Taken by IndySG
- Gibson bridge pickup nickel cover Taken by Hartfeltmusic2010
- Fender chrome p-bass pickup shield
I have more that i'll need to go through!
Hey Dali, how thick is that strat shield?? I may be interested in that
- chrome 6 inline (ping?) closed gear tuners Taken by IndySG
- Gibson bridge pickup nickel cover Taken by Hartfeltmusic2010
- Fender chrome p-bass pickup shield
I have more that i'll need to go through!
Hey Dali, how thick is that strat shield?? I may be interested in that
Last edited:
bungalowbill
Luckybastidologist
Re: Good Karma Thread
For the Dali...
For the Dali...
King IzzO)))
Ultimate Kitten Puncher
Re: Good Karma Thread
I have a Gibson bridge spaced nickel cover with a second row of holes drilled, fits on a Detonator. Makes the Deto look really cool, just take out the bolts, slap the cover on, put the bolts back on and rock. I don't have a use for it anymore.
Will not fit an Invader, only a Deto.
I have a Gibson bridge spaced nickel cover with a second row of holes drilled, fits on a Detonator. Makes the Deto look really cool, just take out the bolts, slap the cover on, put the bolts back on and rock. I don't have a use for it anymore.
Will not fit an Invader, only a Deto.
Franknfilms
New member
Re: Good Karma Thread
A9 Magnet, which was deguassed by 30% to match the A8 output TAKEN
A4 Magnet TAKEN
2 Proline humbucker rings, only have 4 black mounting screws for the Neck ring, the springs/screws are TAKEN
500k alpha audio push/pull, this was too long for my fender style pickguard, but I don't think it is a long shaft. If you're interested I can take measurements
2 EMG Style plastic humbucker covers TAKEN
A9 Magnet, which was deguassed by 30% to match the A8 output TAKEN
A4 Magnet TAKEN
2 Proline humbucker rings, only have 4 black mounting screws for the Neck ring, the springs/screws are TAKEN
500k alpha audio push/pull, this was too long for my fender style pickguard, but I don't think it is a long shaft. If you're interested I can take measurements
2 EMG Style plastic humbucker covers TAKEN
Last edited:
