Got My Emgs
- Thread starter Charvel
- Start date
D
DeadSkinSlayer3
Guest
Re: Got My Emgs
Do not pay 100 bucks to get them installed, that's way too much. I'd pay more like 30 or 35 for 2 pickups, but I do it myself. You should really learn to solder stuff on a cheapie axe or parts.
Do not pay 100 bucks to get them installed, that's way too much. I'd pay more like 30 or 35 for 2 pickups, but I do it myself. You should really learn to solder stuff on a cheapie axe or parts.
Charvel
New member
Re: Got My Emgs
dood im 14 and i only have one guitar so i cant really practise on my axe.... and its 100 Candian so it would be like70-80 us... but still thats alot
i also dont trust myself putting stuff together heh... bad experiance
Its 70-80 for both pickups to get installed if i didnt make that clear..
dood im 14 and i only have one guitar so i cant really practise on my axe.... and its 100 Candian so it would be like70-80 us... but still thats alot
i also dont trust myself putting stuff together heh... bad experiance
Its 70-80 for both pickups to get installed if i didnt make that clear..
Re: Got My Emgs
I'm 16 did my first job when I was 15, but those cloth-braid (single coil) wires are so nice and easy to install. But I have to admit, I never did a successfull job w/ 4-conductor humbucker, wires suck! those plastic pieces of junk. so I'm 0-2 w humbuckers, but 6-6 w/single coils. weird huh.
I'm 16 did my first job when I was 15, but those cloth-braid (single coil) wires are so nice and easy to install. But I have to admit, I never did a successfull job w/ 4-conductor humbucker, wires suck! those plastic pieces of junk. so I'm 0-2 w humbuckers, but 6-6 w/single coils. weird huh.
\m/(00)\m/
HeadBanginologist
Re: Got My Emgs
soldering isn't as hard as you think
i tried it for the first time last year, i didn't mess up either. once you learn how to do it, you'll never forget
soldering isn't as hard as you think
i tried it for the first time last year, i didn't mess up either. once you learn how to do it, you'll never forget
shroudofimpurity
New member
Re: Got My Emgs
Hey bro, putting in those EMG's is a snap, just follow the wiring diagram that came with the pickup! I have installed many pickups for me and my friends, and the one piece of advice is, make sure all of your solders are clean. Tug on the wires a bit after you make your solders to make sure everything is tightly soldered down. Man... too bad you dont live close to me, I'd install them for next to nothing for you. Good luck!
Hey bro, putting in those EMG's is a snap, just follow the wiring diagram that came with the pickup! I have installed many pickups for me and my friends, and the one piece of advice is, make sure all of your solders are clean. Tug on the wires a bit after you make your solders to make sure everything is tightly soldered down. Man... too bad you dont live close to me, I'd install them for next to nothing for you. Good luck!