Ground bridge for Liborator

[jeffdemann]

I am about to install the liberator in my guitar MM with 1 volume, 1 tone and a 3 way toggle. The diagram does not show where to attach the bridge grounding wire. Do I attach it to the liberator or to the tone pot?

I am following this diagram

http://www.seymourduncan.com/wiring-diagrams?meta_params=guitar-options,2-pickups,neck-h,bridge-h,1-volume,1-tone,3-way-toggle,liberator


Any help on where to solder would be greatly appreciated. thanks

 

[eclecticsynergy]

Re: Ground bridge for Liborator

I would attach it to the back of the tone pot.

 

[Mincer]

Re: Ground bridge for Liborator

There are 'ground pads' in a semi-circle around the circuit board.

 

[jeffdemann]

Re: Ground bridge for Liborator

There are 'ground pads' in a semi-circle around the circuit board.

I will try one but don't understand why they don't show that on the diagram if that's recommended. I will see. Was hoping someone that has used the Liberator and this configuration would chime in. Thanks

 

[Mincer]

Re: Ground bridge for Liborator

You can see that in the video for the Liberator.

 

[jeffdemann]

Re: Ground bridge for Liborator

Nice video but he already had the Liberator installed before changing pickups. Does not cover grounding.

 

[Mincer]

Re: Ground bridge for Liborator

You can ground on the ground pads or on the pot- there is also a terminal. This is another video that might help.

 

[jeffdemann]

Re: Ground bridge for Liborator

Great, thanks Mincer