Guitar buzzing like crazy.. HELP!!

seth

New member
Hey guys, I'm restoring my Flying V, and it is buzzing like crazy!

It has a stock pickup in the neck, and a Gibson SG pickup in the bridge. I wired everything according to these schematics: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_2v_1t_3w

When I plug it in, and have the volumes turned up, it buzzes. (When the guitar isn't playing, can't hear it when I'm playing. Also, when I turn up the tone, it sounds like a transformer is going to fry :eek:

I don't think it's my amp, because I tried a B.C. Rich, and it doesn't buzz.

So, I'm concluding it's my guitar, but I have no idea where to start.

Help is appreciated, thanks
 
Re: Guitar buzzing like crazy.. HELP!!

Hey guys, I'm restoring my Flying V, and it is buzzing like crazy!

It has a stock pickup in the neck, and a Gibson SG pickup in the bridge. I wired everything according to these schematics: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_2v_1t_3w

When I plug it in, and have the volumes turned up, it buzzes. (When the guitar isn't playing, can't hear it when I'm playing. Also, when I turn up the tone, it sounds like a transformer is going to fry :eek:

I don't think it's my amp, because I tried a B.C. Rich, and it doesn't buzz.

So, I'm concluding it's my guitar, but I have no idea where to start.

Help is appreciated, thanks


Possibly the bridge grounding wire has pulled out?
 
Re: Guitar buzzing like crazy.. HELP!!

Is said bridge ground wire also soldered to a pot casing? Or maybe to some copper/foil shielding tape on the pickguard? Is the tape connected to the pot/system ground somehow?
 
Re: Guitar buzzing like crazy.. HELP!!

Is said bridge ground wire also soldered to a pot casing? Or maybe to some copper/foil shielding tape on the pickguard? Is the tape connected to the pot/system ground somehow?

The bridge ground is soldered to the tone, that's what the diagram said.

No pickguard either. And the back panel is gone, but I use foil to cover it.

For the wires inside, I didn't use shielded cables, does that matter? I wrapped them in tin foil (shiney side down), and wrapped that in tape. But I didn't notice a diff. from not tin foiling it.
 
Re: Guitar buzzing like crazy.. HELP!!

This is how it's wired:

diagram.jpg
 
Re: Guitar buzzing like crazy.. HELP!!

Looked at the B.C Rich, and wired it the way the BC is. Also, the input jack was faulty.

Works now :)
 
Back
Top