H-S-H Wiring Help

[Jackson Ampworks]

Hey guys, I'm having a friend of mine build a new guitar for me and here is what it has for pickups.

Neck: SD Alnico II Pro
Middle: Fralin Vintage Hot
Bridge: SD EVH

500k CTS Pots

There will be a 5-way switch to select the pickups in the following order:

Position 1: Bridge Humbucker
Position 2: Bridge Split with Single Coil
Position 3: Bridge Humbucker and Neck Humbucker
Position 4: Neck Split with Single Coil
Position 5: Neck Humbucker

Here is where I need some help. I want to have a master volume and two tone pots; one for each humbucker. Any schematics for this?

Also I want to have a standard Les Paul type of 3-way switch that I can use as an ON-OFF-OF switch that will take the output of the pickups and essentially turn them on and off. This will give me the Les Paul type of stutter effect that you can get from selecting the middle position on the Les Paul switch, turning the neck volume down and selecting the bridge pickup.

Any thoughts on this? The guitar is coming together this week and I would like to get this resolved soon as my builder www.pavelmi.com is concerned about this.

Thanks for all of your help!

 

[tone4days]

Re: H-S-H Wiring Help

i think this is correct - assumes use of superswitch (only way to get pos. 3 as N+B as requested) ... note, no tone control of middle pickup

good luck
t4d

 

[tone4days]

Re: H-S-H Wiring Help

bump - artie or any other circuit checker wanna check me on this?

cheers
t4d

 

[Artie]

Re: H-S-H Wiring Help

Looks good to me. Nice drawing too.

 

[Jackson Ampworks]

Re: H-S-H Wiring Help

WOW!! You are incredible!

Thanks!