H-S-S Pickup Wiring

Jpoole03

New member
So I’m currently working on my first guitar build, and I’m entering the final stages as I’m working on my pick guard wiring on my own version of a Frankenstein Stratocaster. I have a Seymour Duncan CS Frankenstsien pup in the bridge and I want that to be on one single 500K volume pot (no tone), but I also want to have the ability to split that Humbucker into a single coil and lower it to a 250K pot (what I want my single coils to be) all at the same time. I want the ablibilty to take my guitar and also make it sound more like an all single coil strat for more versatility. So my question is, can I find a volume pot that does that, such as a push/pull, or is this even possible to split a Humbucker into a single coil without using it with another pickup? I plan on having three controls, one volume and two 250K tones for the single coils, with a 5-way switch.
 
Re: H-S-S Pickup Wiring

First of all, you have a HSS guitar with 1 250k vol and 2 tones, and you want your humbucker to be on a 500k vol pot (without tone), then split and go to the 250k vol pot?

That means your guitar is going to end up with 2 vol pots and 2 tone pots! Is this what you want? If so, yes you can do this with a p/p pot. Otherwise you'll need to convert one of your tone pots to a vol pot and end up with 2 vol pots (1 250k and 1 500k) and 1 master tone pot with one of the three pots being a p/p.
 
Re: H-S-S Pickup Wiring

Yes this is exactly what I’m wanting, I only want three controls. If I have convert one into a a volume instead of a tone that’s fine, but whenever I push or pull that pot to make it 250K, can I also convert that Humbucker into a single coil at the same time? Or am I just making stuff up? Also what type of push/pull pot do I need for this?
 
Last edited:
Back
Top