head and cab connection!

[metal]

well i should be getting the mesa cab this week and i have no idea how to connect the head to the cab ? can anyone help me and tell me where to connect it. here are some pics !!

as you can see the amp says speakers and theres 3 inputs and the cab i think has 2 ! what inputs do i use? thanks in advance

 

[Al Heeley]

Re: head and cab connection!

Take one non-guitar phono jack lead, plug one end into the OUT of the amp, and the other end into the IN of the cab. Check the amp is set to correct ohms, plug giutar in. Drink beer. Play loud.
Note: For one cab/speaker, use the 8ohm output. For 2 cabs, take one lead each out of the 4 ohm outputs.

 

[metal]

Re: head and cab connection!

Take one non-guitar phono jack lead, plug one end into the OUT of the amp, and the other end into the IN of the cab. Check the amp is set to correct ohms, plug giutar in. Drink beer. Play loud.
Note: For one cab/speaker, use the 8ohm output. For 2 cabs, take one lead each out of the 4 ohm outputs.

thanks!! but i dont understand! i connect one end to the input that says 8ohm (back of amp) to the out of the cab??

 

[That90'sGuy]

Re: head and cab connection!

Connect a cable from the 8 ohm speaker output on the head to the 8 ohm "input" on the cabinet (the "output" on your cab is for connecting another cab to it).

 

[metal]

Re: head and cab connection!

Connect a cable from the 8 ohm speaker output on the head to the 8 ohm "input" on the cabinet (the "output" on your cab is for connecting another cab to it).

oh great thanks man!!!