Help needed with Gus G wiring please

[RogerMexiko]

Wired exactly as Seymour Duncan wiring diagram showed for 3 way toggle switch one tone and BPM-1. Am unable to get tone control to work. Have checked wiring several times and no luck.

What is wrong with this picture?



The tone control only using the center pin for cap to ground and wire to output looks odd. Tried several variations but the only change was that one variation turned it into a second volume control??????? puzzled, inexperienced with this stuff.

 

[Oldmiserablebastard]

It is missing the connection from the right tab of the tone pot to the center tab of the toggle switch.

 

[hamerfan]

The master tone pot wiring looks wrong to me. The white wire should go to the right tab of the pot and not to the middle?
On top of this Pickup Lounge there is a sticky thread from Mincer about mistakes in diagrams. Look there and post your problem.

 

[Mincer]

Unfortunately, there are quite a few diagrams that need to be edited to make them work properly, as this thread at the top of the Pickup Forum shows us.