HELP needed with SD SSS & HSS schematisc!! (probably quite simple!)

[zozoe29]

Assuming it's possible, I'd like be able to remove the middle pickup from any tone control, so that the single tone control affects only the bridge and/or the neck pickups. Here's the setups I'm working with:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=3s_1v_1t_5w

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_1t_5w_as

Thanks!!

 

[Funkfingers]

Re: HELP needed with SD SSS & HSS schematisc!! (probably quite simple!)

In the second of the two schematics that you have included, one pole of the selector switch engages the pickups whilst the second pole automates the coil split for the humbucker.

For HSS, you need a selector switch with more than two poles.

 

[Zacker]

Re: HELP needed with SD SSS & HSS schematisc!! (probably quite simple!)

To have the middle bypass the tone control, you need it to be on at all times. But, I'd rather use a DPDT pot to kill the tone and a DPDT to engage the neck at all times.I'll upload the middle bypass AND 7way+All bypass after I finish drawing it on paint

EDITone
Middle Bypass


7 way AND All tone bypass