Help with Classic Stacks

[pinto79]

Hey folks. I'm about to install a pair of classic Stacks into my buddy's Soloist. I have to extend the wires on one of them, but the colour code pattern is different. I have one that's 20+ years old and one that's newer, probably within the last few years. The white/red pair are reversed as are the green/black pair. Please see the pic...

Left one is the newer one...

They have both been wired the same (Traditional, white and red together, green to ground, black hot.) but I want to make sure they are not out od phase with each other when used together if I keep them the same as they are now, or I'm wondering if I should make them both the same (like the newer one)

Anyone have any ideas?

Trevor

 

[jeremy]

Re: Help with Classic Stacks

i dont know. id say try them both the traditional way and go see what happens.
maybe evan will pick this up

 

[pinto79]

Re: Help with Classic Stacks

Ok... I figured it out, the colours are still for the same coils, they just changed where the ends go... I will follow what they are an shouldn't have any problems!

I will post what I find!

Trevor