HH STRAT Wiring
- Thread starter saladin
- Start date
ErikH
Well-known member
Re: HH STRAT Wiring
Right here.
http://www.seymourduncan.com/support/schematics/2hb_1vol_2tones_3way.html
And just in case you're wondering, no you don't have to use a .047uf cap on the tone pots. You can use .022uf instead if you want or mix and match (.047 on the bridge, .022 on the neck or whatever). It's preference.
Right here.
http://www.seymourduncan.com/support/schematics/2hb_1vol_2tones_3way.html
And just in case you're wondering, no you don't have to use a .047uf cap on the tone pots. You can use .022uf instead if you want or mix and match (.047 on the bridge, .022 on the neck or whatever). It's preference.
ErikH
Well-known member
Re: HH STRAT Wiring
Take a look at this.
http://www.seymourduncan.com/support/schematics/std_tele.html
Just substitute the Tele 3-way in for the toggle in the first diagram link I gave and there ya have it.
Take a look at this.
http://www.seymourduncan.com/support/schematics/std_tele.html
Just substitute the Tele 3-way in for the toggle in the first diagram link I gave and there ya have it.
saladin
Active member
Re: HH STRAT Wiring
After racking my brain on these schematics, I simplified it further by removing the volume pot and wiring the first tone as a volume and using the Tele schematic. Perfect, now I don't have to worry about hitting the volume pot while playing anymore. I had a Big Apple 5-way in it but I don't care for the sound of split humbuckers and I like things as simple as possible. Thanks.
After racking my brain on these schematics, I simplified it further by removing the volume pot and wiring the first tone as a volume and using the Tele schematic. Perfect, now I don't have to worry about hitting the volume pot while playing anymore. I had a Big Apple 5-way in it but I don't care for the sound of split humbuckers and I like things as simple as possible. Thanks.
