Hot Rails Jaguar phase question!

[Vanquishings]

So I'll be throwing a Hot Rails into my Jag bridge to see if I like it better than the QP. Wiring seems straight forward, but since I'm keeping the neck as the stock Fender, I have to worry about being out of phase.

I'll be wiring the bridge just like this: http://www.seymourduncan.com/wp-content/uploads/2015/05/Jaguar_2SCH.jpg

Do I need to swap the black with one of the others to keep in phase with the neck, or should I be good to go? I'd rather get it right the first time.

Any help is appreciated, and thanks for the read!

 

[jeremy]

Re: Hot Rails Jaguar phase question!

did you swap wires on your qp? if so, swap the black and green wires on the hot rails

 

[Vanquishings]

Re: Hot Rails Jaguar phase question!

did you swap wires on your qp? if so, swap the black and green wires on the hot rails

I did on the QP. This is exactly what I was looking for. Thanks, Jeremy!

 

[Funkfingers]

Re: Hot Rails Jaguar phase question!

Fender USA or Fender Japan?

 

[Mincer]

Re: Hot Rails Jaguar phase question!

So did it work? How does it sound?