hotrod (sh-2, sh-4) set on an ibanez SA-320X

L

lakomaisipeh_sori

New member
would the hotrod (sh-2, sh-4) matched set with normal spacing work on an ibanez SA-320X with f-spacing?

is it ok to put a normal-spaced humbucker pups both on the bridge and neck that have f-space configuration?

are there any complications if i put the hotrod on my ibanez?
 
Re: hotrod (sh-2, sh-4) set on an ibanez SA-320X

personally i dont hear a difference in tone when i use normal spaced humbuckers in floyd rose guitars. There probably is a difference, but no one would actually notice coz its so minimal.

It just looks weird coz the high and low E strings dont align with the pole pieces nicely.

so no complications in ur ibanez sa320 with these pups
 
Re: hotrod (sh-2, sh-4) set on an ibanez SA-320X

I hear a difference. The E strings aren't as loud as the rest on the bridge pickup.
 
Re: hotrod (sh-2, sh-4) set on an ibanez SA-320X

thanks guys!!

anyways, for those who notice the difference.. are the E's softer in the neck.. or vice versa, on the bridge..?
 
Re: hotrod (sh-2, sh-4) set on an ibanez SA-320X

typically only the bridge has the problem but my raising the offending strings pole piece you can usually compensate
 
You must log in or register to reply here.
Back
Top