Mr 9finger
Digitally Challenged
It's almost a year if not longer since I've even attempted to set down and build a pedal. So I've got all these pedal making supplies just sitting here gathering dust and it's not looking like I'm going to have the time or money to mess w/ them anytime soon. So instead...I'm going to pawn this stuff off onto someone else so they can put this stuff to good use 
I'm not looking to separate this stuff. It's going as one big lot. Just too much hassle for shipping. So here's the list. SOMEONE PLEASE GET THIS STUFF OUT OF MY WAY! :cool2:
Unpopulated PCBs
Dr. Boogey pre Dual Rect red channel preamp emulator (new style)
Slow Century SLO100 preamp emulator
Used Wah 847 Layout board
ROG English Channel AC 30 Top boost Emulator
JCM800 in a box preamp emulator
Fooltone Fulldrive clone
Rebote 2.5 delay
Partially Populated PCBs. I'm ambitionally challenged, what can I say?
Plexizer Plexi in a box clone. These sound good!
Dr. Boogey Old layout. Built both and didn't hear any difference.
Pots Alpha all new and unused.
5x 1 Meg Audio Taper
2x 50k Audio Taper
1x 100k Audio Taper
2x 250k Audio Taper
1x 25k Linear Taper
1x100k Linear Taper
Other stuff
20x J201's
2x Metal LED holders
3x 8 pin op amp holders
4x 2n3904s
2x battery holders
4x BC548C's
1x LM386N opamp
1x 4558MC opamp
2x Metal DC jacks
1x bag of misc. ceramic caps.
And whatever else I find to toss in to sweet'n the deal. There will probably be some caps tossed in there as well. I haven't had the chance to go through that portion of the stuff yet.
$56 shipped and paypaled takes the lot. That's a pretty sweet deal, I've just acquired way to much stuff that is just sitting. So it's got to go!
Couple side notes here. I prefer to keep this one in the states. I don't know what all the new ROHS laws are, if this stuff is compliant, etc... so just to avoid a possible hassle......
Also, I'm getting rid of this stuff cuz I don't have time to deal w/ it. That means I don't really have the time to do tech support on this stuff either. If you need help finding a layout or schematic, I can prolly help you out. Beyond that, you're on your own.
I'm not looking to separate this stuff. It's going as one big lot. Just too much hassle for shipping. So here's the list. SOMEONE PLEASE GET THIS STUFF OUT OF MY WAY! :cool2:
Unpopulated PCBs
Dr. Boogey pre Dual Rect red channel preamp emulator (new style)
Slow Century SLO100 preamp emulator
Used Wah 847 Layout board
ROG English Channel AC 30 Top boost Emulator
JCM800 in a box preamp emulator
Fooltone Fulldrive clone
Rebote 2.5 delay
Partially Populated PCBs. I'm ambitionally challenged, what can I say?
Plexizer Plexi in a box clone. These sound good!
Dr. Boogey Old layout. Built both and didn't hear any difference.
Pots Alpha all new and unused.
5x 1 Meg Audio Taper
2x 50k Audio Taper
1x 100k Audio Taper
2x 250k Audio Taper
1x 25k Linear Taper
1x100k Linear Taper
Other stuff
20x J201's
2x Metal LED holders
3x 8 pin op amp holders
4x 2n3904s
2x battery holders
4x BC548C's
1x LM386N opamp
1x 4558MC opamp
2x Metal DC jacks
1x bag of misc. ceramic caps.
And whatever else I find to toss in to sweet'n the deal. There will probably be some caps tossed in there as well. I haven't had the chance to go through that portion of the stuff yet.
$56 shipped and paypaled takes the lot. That's a pretty sweet deal, I've just acquired way to much stuff that is just sitting. So it's got to go!
Couple side notes here. I prefer to keep this one in the states. I don't know what all the new ROHS laws are, if this stuff is compliant, etc... so just to avoid a possible hassle......
Also, I'm getting rid of this stuff cuz I don't have time to deal w/ it. That means I don't really have the time to do tech support on this stuff either. If you need help finding a layout or schematic, I can prolly help you out. Beyond that, you're on your own.
